General Guide
E-4
Use the number buttons and the [–] and [+] keys to change
the settings of the parameters that appear in the upper left
area of the display.
Use the number buttons to enter numbers and values.
• Enter the same number of digits as the currently displayed
value.
Example:
To enter tone number 004, input 0
3
0
3
4.
• Negative values cannot be input using the number buttons.
Use [+] (increase) and [–] (decrease) instead.
You can use the [+] (increase) and [–] (decrease) keys to
change the displayed number or value.
• Holding down either key scrolls the displayed setting.
• Pressing both keys at the same time will revert to the initial
default setting or the recommended setting.
Use the
FUNCTION
button (
3
) to access settings that let
you select the reverb type, pedal effect, etc.
1.
Press
3
(FUNCTION).
2.
Next press
3
(FUNCTION) until the parameter
whose setting you want to change is displayed.
Each press of
3
(FUNCTION) cycles through the
available parameters.
3.
When the parameter you want is displayed, use
bq
(10-key) to change its setting.
• The parameter setting will disappear from the upper left
area of the screen if you do not perform any operation
for some time.
• The tone and other parameters revert to their initial
defaults whenever you turn on power (page E-6).
Using the 10-key Pad (
bq
)
Number Buttons
[–] and [+] Keys
M d e r n P n o
Setting
Using the FUNCTION Button (
3
)
Parameter
Display
See Page
1
Transpose
Trans.
E-12
2
Accompaniment Volume
AcompVol
E-32
3
Song Volume
Song Vol
E-18
4
Touch Response
(LK-240/LK-247 only)
Touch
E-7
5
Tuning
Tune
E-12
6
Reverb
Reverb
E-11
7
Voice Fingering Guide
Speak
E-23
8
Note Guide
NoteGuid
E-24
9
Performance Evaluation
Scoring
E-24
10 Phrase
PhraseLn
E-24
11 Sampling Start
SmplAuto
E-14
12 Keyboard Channel
Keybd Ch
E-34
13 Navigate Channels
Navi. Ch
E-34
14 Local Control
Local
E-35
15 Accomp Out
AcompOut
E-35
16 Pedal Effect
Jack
E-11
17 Power On Alert
Demo2
E-6
Parameter
Setting
T r a n s .
B
LK240_02_e.fm 4 ページ ２０１２年１２月２５日 火曜日 午後１２時９分