— 20 —
To disassemble the camera unit
Note: The camera unit must be replaced with whole unit when it is defective, because the precise adjustment
is required when the individual parts of the camera unit are replaced, and it can be done only at our
factory.
(Except for the replacing the outer case.)
4. Unhook and remove the
lens and CCD unit from the
outer case as shown in the
picture.
Lever
1. Be sure to turn the lever to "TELE".
2. Remove the two screws.
3. Remove the cover of the camera unit at the
opposite side of the lever.
Cover
Hook
Summary of Contents for KX-724B
Page 1: ...R QV 30 B KX 724B APR 1996 without price For NTSC...
Page 38: ...37 KEY Battery To Digital PCB...
Page 40: ...MA0500361A...
