35
2.6
Vibrator
Vibrator (vibration) operates for scan complete, alarm occurrence, warning occurrence, wireless
incoming call, and user-defined purpose.
Each vibration operation can be turned on and off individually. The functions of each are as follows:
2.6.1
Vibrator control
There is one level of vibration intensity, and the vibration interval can be set in two different patterns,
the default setting and a user-defined setting.
Pattern
Specification
Remarks
Default
Vibration on for 1 second, off for 1
second x [times]
Maximum no. of times: 20
User Specified
vibration period, specified
stop period x [times]
Specification range: Vibration: 1/16s ~
16s
Stop: 1/16s ~ 1s
Maximum no. of times: 20
Type
Vibration pattern
Individual setting
Default
Alarm Default
ON/OFF
OFF
Warning Default
ON/OFF
OFF
Barcode scan complete
Default
ON/OFF
OFF
Wireless incoming call
Default
ON/OFF
OFF
User definition
User
ON/OFF
OFF
- The vibrator can be set from a tool or from a private library.
- The vibrator has lower priority.
- The vibrations in the table above can be suppressed from the system library.
For details, refer to the System Library Manual.
- Virtual Off
Vibrator vibration requests are ignored. Vibration that is already in progress is stopped.
Vibrator vibration requests are accepted again on restoration from the virtual off state.
