background image

 

 

6

 

1. Product 

Overview 

1.1  Features at a Glance 

IT-9000 has been designed using the new concept of the Human-centered Design Processes and is 
capable of performing a wide variety of powerful functions. 
The following is a brief overview of the features available on the IT-9000 series handheld terminals. 
For further detail on the hardware specifications, refer to IT-9000 Series Hardware Manual. 
 

Outstanding development environment   

 

Microsoft

®

 Windows Mobile

®

 6.5 English Version as the built-in OS 

 

Visual Studio 2008 

 

Visual Studio 2005 

 

Various communication systems 

 

Built-in ultra-small WLAN module compatible with the IEEE802.11b/g standard 

 

Built-in WWAN module combines GSM, GPRS and EDGE modules with GPS receiver 

designed for use in transportation and logistics. 

 

High speed infrared communication with IrDA Version. 1.3 

 

Bluetooth

® 

Version 2.0 

 

Serial interface with USB version 1.1 (Host/Client) 

 

Small size, light weight 

 

Dimensions : Approx. 111.9(W) x 59.7 (D) x246.3 (H) mm 

 

Weight  

: Approx. 590 g 

 

Improved durability 

 

Impact resistance  

 

: 1.5 m in height * 

 

Dust/Water-splash proof  : IP67 level (compliant with IEC60529 International Standard) 

 

* The drop durability height is a measured value resulting from actual testing. It does not necessarily guarantee the 

product from damage.

 

Summary of Contents for IT-9000WM Series







































































Reviews: