— 3 —
TELEMEMO MODE
The Telememo Mode lets you store up to 30 records, each
with a name (up to eight characters) and a phone number
(up to 14 digits). Records are automatically sorted based
on the names. You can recall records by scrolling through
them on the display.
•
See the “CHARACTER LIST” for details on how the
watch sorts records.
•
The message “NO-DATA” appears when there are no
records stored in memory.
•
The blank screen appears when you scroll to the loca-
tion between the last and the first records stored in
memory.
Press
D
.
Press
A
.
Mode indicator
Telephone number
Name
Remaining memory
0 ~ 9
(Space)
Press
.
Press
.
•
The record on the display when you exit the Telememo Mode appears first the next
time you enter the Telememo Mode.
To input a new Telememo record
1. In the Telememo Mode, if the message “NO-DATA” is not on the display, press
D
and
B
at the same time. This causes the blank screen to appear.
•
If the blank screen does not appear when you press
D
and
B
, it means that
memory is full. To store another record, you will first have to delete a record stored
in memory.
2. Hold down
A
and a cursor appears on the display.
3. Use
D
(+) and
B
(–) to scroll through characters at the current cursor position.
Characters scroll in the sequence shown below.
•
Holding down
D
or
B
scrolls at high speed.
4. When the character you want is at the current cursor position, press
C
to move
the cursor to the right.
5. Repeat the steps 3 and 4 to input the rest of the characters.
6. After you input the name, use
C
to move the cursor to the right until the number
input screen “-----” appears.
•
You can input up to eight characters for the name, though only six characters are
visible at a time. If the name you input has fewer than eight characters, use
C
to
move the cursor to the eighth space (which means you would press
C
three times
after inputting a five-character name).
•
Pressing
C
again while the cursor is at the eighth space changes to the number
input screen. When the cursor is at the 14th digit of the number input screen, press-
ing
C
causes the name input screen to appear again.
7. Use
D
(+) and
B
(–) to scroll through characters (hyphen, numbers, space) at the
current cursor position on the number screen. Characters scroll in the sequence
shown below.
A ~ Z
0 ~ 9
(
(
(Space)
Press
.
Press
.
•
Holding down
D
or
B
scrolls characters at high speed.
8.When the character you want is at the cursor position, press
C
to move the cursor
to the right.
9.Repeat steps 7 and 8 to input the rest of the numbers you want.
•
You can input up to 14 digits for the number.
10. After inputting the name and number of the record, press
A
to store it.
•
The message “SORT” appears on the display for a few moments after you press
A
to indicate that the watch is sorting records.
•
After the record is sorted, the cursor appears in the display, ready for input.
11. Input the next record or press
A
to exit the setting screen.
•
The display can show only six name characters or nine number digits at a time.
Longer names and numbers scroll continuously from right to left. The symbol “ ”
indicates that the character or digit to the left is the last, and the character or digit to
the right is the first.
•
Pressing
D
while a name is scrolling on the display jumps to the first character of
the name. Scrolling resumes from there.
•
Pressing
A
while a number is scrolling on the display jumps to the first digit of the
number. Scrolling resumes from there.
To recall Telememo data
1. In the Telememo Mode, press
D
to scroll forward through the names of the stored
records.
•
Holding down
D
scrolls through the names at high speed.
2. When the name for the record you want is on the display, press
A
to view its
number.
3. Pressing
D
while a number screen is on the display returns to the name screen.
•
At this point you could press
D
again to scroll through names.
To edit Telememo data items
1. In the Telememo Mode, press
D
to scroll forward through the names of the stored
records.
•
Holding down
D
scrolls through the names at high speed.
2. When the name for the record you want is on the display, hold down
A
until the
cursor appears in the display.
3. Use
C
to move the cursor to the character you want to change.
4. Use
D
(+) and
B
(–) to change the character.
•
See step 3 of “To input a new Telememo record” for information on inputting name
characters, and step 7 for inputting number characters.
5. After making the changes that you want, press
A
to store them and exit the set-
ting screen.
•
The message “SORT” appears on the display for a few moments after you press
A
to indicate that the watch is sorting records.
To delete Telememo data
1. In the Telememo Mode, press
D
to scroll forward through the names of the stored
records.
•
Holding down
D
scrolls through the names at high speed.
2. When the name for the record you want is on the display, hold down
A
until the
cursor appears in the display.
3. Press
D
and
B
at the same time. The message “CLEAR” appears in the display,
indicating that the record was deleted.
•
After the record is deleted, the cursor appears in the display, ready for input.
4. Input a record or press
A
to exit the setting screen.
ALARM MODE
You can set up to five daily alarms. When the Daily Alarm
is turned on, the alarm sounds for 20 seconds at the pre-
set time each day. Press any button to stop the alarm
after it starts to sound. When the Hourly Time Signal is
turned on, the watch beeps every hour on the hour.
To set the alarm time
1. While in the Alarm Mode, press
D
to display the num-
ber of the alarm you want to set.
Mode indicator
Alarm number
Hour Minutes
Alarm on indicator
2. Hold down
A
until the hour digits flash on the display, indicating the setting screen.
•
At this time, the alarm is turned on automatically.
3. Press
C
to move the flashing in the sequence shown below.
4. Use
D
(+) and
B
(–) to change the setting. Holding down either button changes
the setting at high speed.
5. After you set the alarm time, press
A
to exit the setting screen.
•
The format (12-hour and 24-hour) of the alarm time matches the format you select
in the Timekeeping Mode.
•
When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
To stop the alarm
•
Press any button to stop the alarm after it starts to sound.
To turn a daily Alarm or the Hourly Time Signal on and off
1. Use
D
to display the alarm you want to turn on or off, or the screen for turning the
Hourly Time Signal on or off.
2. Press
A
to toggle the displayed alarm or Hourly Time Signal on and off.
•
In the Alarm Mode, the alarm on indicator appears to indicate the on/off status of
the currently displayed alarm. In all other modes, the alarm on indicator appears
when any one of the five alarms is turned on. The alarm on indicator is not dis-
played in other modes when all alarms are turned off.
Alarm 1
Alarm 5
Alarm 2
Alarm 3
Alarm 4
Hourly Time Signal
Hour
Minutes
Daily Alarm indicator
Hourly Time
Signal indicator
•
The Hourly Time Signal indicator is displayed in all modes when the Hourly Time
Signal is turned on.
To test the alarm
In the Alarm Mode, hold down
D
to sound the alarm.
•
The alarm test does not work while the Alarm Mode setting screen is on the display.
•
Holding down
D
to test the alarm also advances to the next alarm number.
Mode indicator
1/100 second
Minutes
Seconds
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 59
minutes, 59.99 seconds. You can use the EL backlight by
pressing
B
at any time while the stopwatch is operating.
Elapsed time measurement
D
D
D
D
A
Start
Stop
Re-start
Stop
Clear
Split time measurement
D
A
A
D
A
Start
Split
Split release
Stop
Clear
Split time and 1st-2nd place times
D
A
D
A
A
Start
Split
Stop
Split release
Clear
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
Record time of
second runner.
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤
➤