9
Operating the Camera with the Remote Controller
Operating the Camera with the Remote Controller
The operations below can be performed on a remote controller that is connected with
a camera.
NOTE
• The remote controller’s operation lamp will slowly flash green while it is connected
with a camera. The operation lamp will flash faster if there is no connection with the
camera.
• If you press a remote controller button while the remote controller is unable to
control the camera because of a poor connection, the remote controller will vibrate
to let you know.
.
To record a movie
Press [
0
] to start recording. Press [
0
] again to stop
recording.
.
Shooting Snapshots
Press [
r
/SLOW].
.
Changing the Recording Mode to Dramatic Slow Motion
When the current camera recording mode is Auto, hold down the [
0
] button for about
two seconds to change it to Dramatic Slow Motion. To return to the Auto mode, hold
down the [
0
] button for about two seconds again.
• While the recording mode is Dramatic Slow Motion, the operation lamp will flash
amber.
IMPORTANT!
• The camera’s recording mode can be changed from Auto to Dramatic Slow Motion
by the remote controller when only the remote controller is connected with the
camera. It cannot be switched by the remote controller while another device
(controller with LCD, smartphone) is also connected. For information about
operation while the camera is connected with a smartphone or a controller with
LCD, refer to the G’z EYE app or controller with LCD user documentation.
Shooting Images
Changing to Slow Motion Shooting while Recording a Movie
(Dramatic Slow Motion)
