background image

Operation Guide 3160

4

Timekeeping

Resetting the seconds to 

00

 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 

00

 without changing the minutes.

The year can be set in the range of 2000 to 2099.

The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch’s battery replaced.

The current time for all city codes in the Timekeeping Mode and World Time Mode is
calculated in accordance with the Coordinated Universal Time (UTC) for each city,
based on your Home City time setting.

World Time

The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.

Illumination Precautions

The electro-luminescent panel that provides illumination loses power after very long
use.

Illumination may be hard to see when viewed under direct sunlight.

The watch may emit an audible sound whenever the display is illuminated. This is due
to vibration of the EL panel used for illumination, and does not indicate malfunction.

Illumination turns off automatically whenever an alarm sounds.

Frequent use of illumination runs down the battery.

Auto light switch precautions

Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light
switch to operate when it is not needed, which shortens battery life. If you want to
wear the watch on the inside of your wrist, turn off the auto light switch feature.

Illumination may not turn on if the face of the watch is
more than 15 degrees above or below parallel. Make
sure that the back of your hand is parallel to the ground.

Illumination turns off after a preset amount of time (1.5
seconds), even if you keep the watch pointed towards
your face.

Static electricity or magnetic force can interfere with proper operation of the auto
light switch. If illumination does not turn on, try moving the watch back to the starting
position (parallel with the ground) and then tilt it back toward you again. If this does
not work, drop your arm all the way down so it hangs at your side, and then bring it
back up again.

More than 15 degrees
too high

Under certain conditions, illumination may not turn on until about one second after
you turn the face of the watch towards you. This does not necessarily indicate
malfunction of the auto light switch.

You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.

Specifications

Accuracy at normal temperature:

 ± 15 seconds a month

Timekeeping: 

Hour, minutes, seconds, p.m. (P), month, day, day of the week

Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes); Standard Time /

Daylight Saving Time (summer time)

World Time:

 48 cities (29 time zones)

Other: Daylight Saving Time/Standard Time

Alarms:

 5 daily alarms (four one-time alarms; one snooze alarm); Hourly Time Signal

Stopwatch:

Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99''
Measuring modes: Elapsed time, split time, two finishes

Countdown Timer:

Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)

Illumination:

 EL (electro-luminescent panel); Auto Light Switch

Other:

 Button operation tone on/off

Power Supply:

 Solar cell and one rechargeable battery

Approximate battery operating time: 11 months (from full charge to Level 4) under
the following conditions:

Watch not exposed to light

Internal timekeeping

Display on 18 hours per day, sleep state 6 hours per day

1 illumination operation(1.5 second) per day

10 seconds of alarm operation per day

Frequent use of illumination runs down the battery. Particular care is required
when using the auto light switch.

City Code Table

Pago Pago

Honolulu

Anchorage

Vancouver

Los Angeles

Edmonton

Denver

Mexico City

Chicago

Miami

Toronto

New York

Santiago

Halifax

St. Johns

Rio De Janeiro

Praia

Lisbon

London

Madrid

Paris

Rome

Berlin

Stockholm

–11

–10

–9

–8

–7

–6

–5

–4

–3.5

–3
–1

0

+1

PPG

HNL
ANC

YVR

LAX

YEA
DEN

MEX

CHI

MIA

YTO

NYC

SCL

YHZ
YYT

RIO
RAI

UTC

LIS

LON

MAD

PAR

ROM

BER
STO

City

UTC Offset/

GMT Differential

City

Code

City

UTC Offset/

GMT Differential

City

Code

Based on data as of June 2008.

The rules governing global times (UTC offset and GMT differential) and summer
time are determined by each individual country.

ATH

CAI

JRS

MOW

JED

THR

DXB

KBL

KHI

DEL

DAC

RGN

BKK

SIN

HKG

BJS

TPE
SEL

TYO
ADL

GUM

SYD

NOU
WLG

Athens

Cairo

Jerusalem

Moscow

Jeddah

Tehran

Dubai
Kabul

Karachi

Delhi

Dhaka

Yangon

Bangkok

Singapore

Hong Kong

Beijing

Taipei
Seoul

Tokyo

Adelaide

Guam

Sydney

Noumea

Wellington

+2

+3

+3.5

+4
+4.5

+5
+5.5

+6
+6.5

+7

+8

+9

+9.5

+10

+11
+12

Summary of Contents for G-5600NV-2

Page 1: ...cation is not included in the preset city codes select the preset city code that is in the same time zone as your location Note that all of the times for the World Time Mode city codes are displayed in accordance with the time and date settings you configure in the Timekeeping Mode Current Time PM indicator Hour Minutes Seconds Day of week Month Day To set the time and date manually 1 In the Timek...

Page 2: ...indicator Stopwatch The stopwatch lets you measure elapsed time split times and two finishes The display range of the stopwatch is 23 hours 59 minutes 59 99 seconds The stopwatch continues to run restarting from zero after it reaches its limit until you stop it The stopwatch measurement operation continues even if you exit the Stopwatch Mode Exiting the Stopwatch Mode while a split time is frozen ...

Page 3: ...ing conditions can cause the watch to become very hot Avoid leaving the watch in the areas described below whenever charging its rechargeable battery Also note that allowing the watch to become very hot can cause its liquid crystal display to black out The appearance of the LCD should become normal again when the watch returns to a lower temperature Warning Leaving the watch in bright light to cha...

Page 4: ...the face of the watch towards you This does not necessarily indicate malfunction of the auto light switch You may notice a very faint clicking sound coming from the watch when it is shaken back and forth This sound is caused by mechanical operation of the auto light switch and does not indicate a problem with the watch Specifications Accuracy at normal temperature 15 seconds a month Timekeeping Ho...

Reviews: