Casio FX-9700GH, Service Manual & Parts List

Page: 14 / 25

– 12 –
Warning!
Transferring data using ALL causes data in the applicable memory areas of the receiving unit to be replaced
by the received data. Make sure that you do not need the data stored in the receiving unit before you start an
operation using ALL.
•
To send data using ALL
Send Unit
Starting from the LINK Mode, press the function key
to enter the send mode.
F1
(TRN)
Make sure that the pointer is located at ALL, and
press
EXE
to specify it as the data type.
EXE
Press
F1
(YES) to start the send operation, or
F6
(NO) to abort without sending anything.
F1
(YES)
* Pressing
AC
interrupts the send operation and
returns to the LINK Mode.
The following appears after the send operation is
complete.
* Press
AC
to return to the LINK Mode.
Receive Unit
Starting from the LINK Mode, press the function key
to enter the receive mode.
F2
(RCV)
Make sure that the pointer is located at ALL, and
press
EXE
to specify it as the data type.
EXE
Press
F1
(YES) to start the receive operation, or
F6
(NO) to abort without receiving anything.
F1
(YES)
* Pressing
AC
interrupts the receive operation and
returns to the LINK Mode.
The following appears after the receive operation is
complete.
COMMUNICATION
COMPLETE
ALL DATA
PRESS [ AC ]
= = TRANSMIT = =
ALL
YES NO
F1 F6
= = TRANSMITTING = =
ALL DATA
TO STOP : [ AC ]
TRANSMIT DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory
RECEIVE DATA
ALL
Program
Editor
Function Memory
Matrix
Statistics
Variable Memory
= = RECEIVE = =
ALL
YES NO
F1 F6
COMMUNICATION
COMPLETE
ALL DATA
PRESS [ AC ]
= = RECEIVING = =
ALL DATA
TO STOP : [ AC ]