— 25 —
To switch between NORM 1 and NORM 2
Press
F
9
. There is no indication on the display of which
format is currently in effect, but you can determine the setting
by performing the following calculation.
1
\
200
=
NORM 1 format
NORM 2 format
• All of the examples in this manual show calculation results
using the NORM 1 format.
k
When you have a problem...
If calculation results are not what you expect or if an error
occurs, perform the following steps.
1.
F
0
(COMP mode)
2.
F
4
(DEG mode)
3.
F
9
(NORM mode)
4. Check the formula you are working with to confirm it is
correct.
5. Enter the correct modes to perform the calculation and
try again.
k
Making Corrections During Calculations
• If you make a mistake when inputting a value (but did not
yet press an operator key), use
Q
to backspace and delete
input digits one-by-one. Or you can press
k
to clear the
input entirely and start again.
5.
–03
0.005
