background image

— 2 —

Delete

Single-file, all files (with protection)

Effective Pixels

7.2 million

Imaging Element

1/1.8-inch square pixel color CCD (Total pixels: 7.41 million)

Lens/Focal Distance

Lenses

F2.8 (W) to 5.1(T); f=7.9(W) to 23.7mm (T) (equivalent to approximately 38 (W) to 114mm (T)

for 35mm film)

7 lenses in 6 groups, with aspherical lens

Zoom

3X optical zoom; 8X digital zoom (24X in combination with optical zoom)

Focusing

Contrast Detection Auto Focus

Focus Modes

Auto Focus, Macro mode, Pan Focus (movies only), Infinity mode, manual focus

AF Area

spot, multi, free; AF Assist Light

Approximate Focus Range

Auto Focus

Snapshots : 40cm to 

 (1.3´ to 

)

(from lens surface)

Movies

: 40cm to 

 (1.3´ to 

)

Macro

Snapshots : 10cm to 50cm (3.9˝ to 19.7˝)

Movies

: 10cm to 50 cm (3.9˝ to 19.7˝)

Infinity Mode

Manual

10cm to 

 (3.9˝ to 

)

• Using optical zoom causes the above ranges to change.

Exposure Control

Light Metering : Multi-pattern by CCD

Exposure

: Program AE, Manual Exposure

Exposure Compensation : –2EV to +2EV (1/3EV units)

Shutter

CCD electronic shutter; mechanical shutter

Snapshot mode

Program AE : 1/8 to 1/1600 second / Manual Exposure / Shutter Speed

Priority AE

: 60 to 1/1600 second

Aperture Priority AE : 1 to 1/1600 second

• Above shutter speeds do not apply when using a BEST SHOT scene.

Aperture

F2.8/4.0*, auto switching

* Brightness converted

• Using optical zoom causes the aperture to change.

White Balance

Auto WB, fixed (6 modes), manual switching

Sensitivity

Snapshots : Auto, ISO 50, ISO 100, ISO 200, ISO 400

Movies

: Auto

Self-timer

10 seconds, 2 seconds, Triple Self-timer

Built-in Flash

Flash Modes

Auto Flash, ON, OFF, Red eye reduction

Flash Range

Wide Angle Optical Zoom : 0.4 to 2.9 meters (1.3´ to 9.5´)

Telephoto Optical Zoom

: 0.4 to 1.6 meters (1.5´ to 5.2´) (ISO Sensitivity: “Auto”)

* Depends on zoom factor.

Recording Functions

Snapshot; audio snapshot; macro; self-timer; BEST SHOT; movie with audio (Movie, Short

Movie, Past Movie, MOVIE BEST SHOT) ; voice recording

• Audio recording is monaural.

Audio Recording Time

Audio Snapshot : Approximately 30 seconds maximum per image

Voice Recording : Approximately 25 minutes with built-in memory

After Recording : Approximately 30 seconds maximum per image

Monitor Screen

2.5-inch TFT color LCD

115,200 pixels (480 

 240)

Viewfinder

Monitor screen and optical viewfinder

Timekeeping Functions

Built-in digital quartz clock

Date and Time : Recorded with image data

Auto Calendar : To 2049

World Time

: City; Date; Time; Summer time;

162 cities in 32 time zones

Input/Output Terminals

Cradle connector

Microphone

Monaural

Speaker

Monaural

Summary of Contents for Exilim EX-Z750








































Reviews: