Casio EX-Z790 User Manual Download

Page: 103 / 132

103

Other Settings (Set Up)

Procedure

[SET]

MENU

“Set Up” Tab

Disabled

The camera will not start the image delete operation when you press [ ] (Delete)
while “

Disabled” is turned on.

You can protect against accidental deletion of images by selecting “On” for
“

Disabled”.

• Performing a format operation (page 104) will cause all images to be deleted, even

if file deletion is disabled (“On” selected for “

Disabled”) for some images.

Procedure

[SET]

MENU

“Set Up” Tab

Video Out

You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.

• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.

Images will not display correctly if you select the wrong aspect ratio.

• Images will not display correctly unless the camera’s video signal output setting

matches the video signal system of the TV or other video equipment.

• Images cannot be displayed correctly on a TV or video equipment that is not NTSC

or PAL.

• An optionally available AV cable (EMC-7A) is required for video output.

Disabling File Deletion (

Disabled)

Selecting the Screen Aspect Ratio and Video Output System

(Video Out)

NTSC

Video system used in Japan, the U.S., and other countries

PAL

Video system used in Europe and other areas

4:3

TV screen aspect ratio of 4:3

16:9

Wide screen aspect ratio

Summary of Contents for EX-Z790





































































































































Search results

Summary of Contents for EX-Z790

Reviews:

Related manuals for EX-Z790

Brands by name

Popular brands

Casio EX-Z790, User Manual

Search results

Summary of Contents for EX-Z790

Reviews:

Related manuals for EX-Z790

Brands by name

Popular brands