143
EDITING IMAGES
Perform the following procedure to rotate the image currently on
the monitor screen. This feature comes in handy with a snapshot
that you shot using portrait (vertical) orientation. After rotating a
snapshot, you can return it to its original orientation, if you want.
•
Note that this procedure does not actually change the image
data. It simply alters how the snapshot is displayed on the
camera’s monitor screen.
1.
In the PLAY mode, press [MENU].
2.
On the “PLAY” tab, select “Rotation” and then
press [
X
].
•
This operation can be performed only while a snapshot is
on the monitor screen.
3.
Use [
W
] and [
X
] to select the snapshot whose
display image you want to rotate.
4.
Use [
S
] and [
T
] to select “Rotate” and then
press [SET].
•
Each press of [SET] will rotate the displayed image 90
degrees left.
5.
When the displayed image is at the orientation
you want, press [MENU].
IMPORTANT!
•
You cannot rotate an image that is protected. To rotate a
protected snapshot, first remove its protection (page 154).
•
Zoomed images cannot be rotated.
•
The original (unrotated) version of a snapshot’s image will
be displayed on the 12-image screen and the calendar
screen.
Rotating an Image
