28
Quick Start Basics
.
To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly.
Pull the card out the rest of the way and then insert
another one.
• Never remove a card from the camera while the
back lamp is flashing green. Doing so can cause the
image save operation to fail and even damage the
memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 27).
2.
Turn on the camera and then touch “
” (Show Icons).
3.
Touch “MENU”.
4.
Drag upwards and downwards until you find “Setup”, and then touch it.
5.
Touch “Format”.
6.
Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
To format (initialize) a new memory card
