Casio EX-S770BE User Manual Download

Page: 63 / 290

SHOOTING A SNAPSHOT

SHOOTING A SNAPSHOT

Holding the camera with one hand can result in accidental hand

movement. Hold the camera securely with both hands when

shooting snapshots.

•

To protect against accidentally dropping the camera, attach

the wrist strap and make sure it is around your fingers or wrist

while you are operating the camera.

•

The supplied strap is intended for use with this camera only.

Never use it for any other purpose.

•

Never swing the camera around by its strap.

IMPORTANT!

•

Take care that your fingers and the strap do not cover any

of the areas indicated in the illustration.

Holding the Camera Correctly

Horizontal

Vertical

Hold the camera as shown in the

illustration, with your arms firmly

against your sides.

Hold the camera so the

flash is above the lens.

Flash

AF Assist/Self-timer Lamp

Microphone

Lens

Summary of Contents for EX-S770BE



































































































































































































































































































Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands

Casio EX-S770BE, User Manual

Search results

Summary of Contents for EX-S770BE

Reviews:

Related manuals for EX-S770BE

Brands by name

Popular brands