219
USING THE CAMERA WITH A COMPUTER
3.
Press the camera’s [ON/OFF] button to turn it
on and then press [MENU].
•
Do not place the camera on the USB cradle yet.
4.
On the “Set Up” tab, select “USB” and then
press [
X
].
5.
Use [
S
] and [
T
] to select “Mass Storage” and
then press [SET].
6.
Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
•
Do not place the camera onto the USB cradle while it is
turned on.
•
If you plan to transfer images from the camera’s built-in
memory to your computer, make sure there is no memory
card loaded in the camera.
7.
Press the USB
cradle’s [USB]
button.
USB Lamp
[USB]
