Casio EX-M2 - EXILIM Digital Camera User Manual Download

Page: 93 / 119

USING THE CAMERA WITH A COMPUTER

Turn off the camera
and remove its
connector cover.

Making sure that the
camera is turned off,
set it onto the USB
cradle.

• Do not place the

camera onto the USB
cradle while it is turned
on.

Turn on the camera.

• When you turn on the camera, it enters the USB Mode

and automatically transfers the files in camera
memory to the computer.

• While the camera is in the USB Mode, the USB lamp

on the cradle lights green (page 109).

IMPORTANT!

• Be sure to read the applicable information in the user

documentation that comes with your computer before
connecting the USB cradle.

• Do not leave the same image displayed on your com-

puter screen for a long time. Doing so can cause the
image to “burn in” on the screen.

• Take care when connecting the USB cable to the USB

cradle. The USB port and the cable plug are shaped
for proper positioning.

• Plug the USB cable into the ports securely as far as it

will go. Proper operation is not possible if connections
are not correct.

• Be sure to connect the AC adaptor to the USB cradle

to supply power to the camera.

• The optionally available CASIO QC-1U USB cable

cannot be used with this camera.

• Never disconnect the USB cable while the PC is ac-

cessing camera memory (indicated by a flashing USB
lamp). Doing so can cause data to become corrupted.

• You can perform data communication in either the

REC mode or PLAY mode.

Connector
cover

Summary of Contents for EX-M2 - EXILIM Digital Camera
























































































































Search results

Summary of Contents for EX-M2 - EXILIM Digital Camera

Reviews:

Related manuals for EX-M2 - EXILIM Digital Camera

Brands by name

Popular brands

Casio EX-M2 - EXILIM Digital Camera, User Manual

Search results

Summary of Contents for EX-M2 - EXILIM Digital Camera

Reviews:

Related manuals for EX-M2 - EXILIM Digital Camera

Brands by name

Popular brands