98
Other Playback Functions (PLAY)
Procedure
[
p
] (PLAY)
*
Snapshot Screen
*
[MENU]
*
PLAY Tab
*
Lighting
You can use this setting to optimize the balance between bright areas and dark areas
in existing images.
NOTE
• Correcting the lighting when shooting produces better results (page 83).
• Altering the lighting of an image causes the original image and the new (altered)
version to be stored as separate files.
• When you display an altered image on the camera’s monitor screen, the date and
time indicates when the image was originally recorded, not when the image was
altered.
Procedure
[
p
] (PLAY)
*
Snapshot Screen
*
[MENU]
*
PLAY Tab
*
Red Eye
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. Red eye correction corrects the eye colors of
subjects to their normal colors when red eye occurs while using the flash.
NOTE
• The original snapshot is retained in memory and not deleted.
• Red eye correction may not be possible in the case of small faces or profiles.
• Red eye correction may not produce the desired effect under certain conditions.
Optimizing Image Brightness (Lighting)
+2
Performs a higher level of brightness correction than the “+1” setting.
+1
Performs brightness correction.
Cancel
Does not perform brightness correction.
Using Red Eye Correction (Red Eye)
Correct
Turns on red eye correction.
Cancel
Turns off red eye correction.
