44
Recording Images
NOTE
• Anti-shake is applied in accordance with the current camera settings. However,
image anti-shake is not applied.
• The current shooting setup, including zoom, cannot be changed while shooting
with this function.
• The image after each recording operation is displayed only while “Type 1” is
selected as the Review image type (page 57).
• If the camera battery goes dead during an Interval Shooting operation, the
operation will terminate. The controller battery going dead does not affect an
ongoing operation. To stop the Interval Shooting operation in this case, hold down
[
p
] (Power) on the camera for about two seconds.
• If you are performing manual camera operations or if the camera is out of the sleep
state when the Interval Shooting operation reaches a shooting interval, Interval
Shooting recording for that interval will be skipped.
• Pressing the controller’s [
p
] (Power) button while the camera is out of the sleep
state will return to the sleep state and restart the Interval Snapshot operation.
• Initial default settings depend on the selected scene.
• If you change any settings, they are retained when you turn the camera off. To
restore initial default settings, perform a reset operation (page 107) to reset the
camera.
• Certain environments may cause the shooting interval to be longer than normal.
