Important!
●
If you have problems establishing a
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone’s home
screen, tap the “CASIO WATCH+”
icon. After the app starts up, hold
down the watch’s (B) button for
about 1.5 seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with:
use CASIO WATCH+ to select
“Watch settings”
n
“Connection
time”, and then specify a setting of 3
minutes, 5 minutes, or 10 minutes.
Disconnecting from a Phone
Pressing (B) terminates the Bluetooth
connection and returns the day of the week
hand to its normal operation.
30
30
After disconnection
Connected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
adjustment may cause problems, you can
perform the procedure below to disable it.
Perform the same procedure again to re-
enable auto time adjustment.
1.
Y
On the Home Screen, tap the “CASIO
WATCH+” icon.
2.
X
Hold down the (B) button for about 1.5
seconds.
●
The day of the week hand will move to
“R”. Keep (B) depressed until the day of
the week hand starts moving again and
then stops at “R”.
●
The day of the week hand will move to
e
when a connection is established
between the watch and phone.
3.
Y
Tap in the following sequence:
f
n
“Watch settings”.
4.
Y
Tap “Time adjustment”.
5.
Perform the operation shown on the
phone screen.
Unpairing
1.
X
If the watch is connected with a phone,
press (B) to terminate the connection.
30
30
After disconnection
Connected
2.
Y
On the Home Screen, tap the “CASIO
WATCH+” icon.
3.
Y
Tap the CASIO WATCH+
j
icon.
4.
Y
In the “Previously registered watch” list,
tap the watch you want to unpair.
5.
Y
Tap “Delete pairing registration”.
6.
Y
Tap “Delete”.
This unpairs the watch from the phone.
Note
●
If you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A
X
Pull out the crown to the second
click.
30
Crown
B
X
Hold down (C) for about five
seconds.
This causes the day of the week hand
to perform one revolution and deletes
the pairing information.
C
X
Push the crown back in.
If you purchase another phone
You need to perform the operation below
whenever you want to establish a Bluetooth
connection with a phone that is different from
the one you are currently connected with.
1.
Unpair the watch from your current (old)
phone.
l
2.
Pair the watch with your new phone.
l
Pairing the Watch with a phone
Operation Guide 5467
8
