8
2.2 DT-364IOE (Bridge Satellite Cradle)
Table 2.2
No. Name
Description
1
USB port
This port accepts connection of a USB cable for connection to a computer
for transfer of system data and file data. Use of the USB port requires
installation of a special driver on the PC.
2
RS-232C port
This port accepts connection of an RS-232C cable for connection to a
computer for transfer of system data and file data. Use of the RS-232C port
requires installation of a special driver on the PC.
3
RS-422C port
This port is used when connecting to another Bridge Satellite Cradle.
4 Terminal
detect
switch
This switch detects when the DT-300 is seated correctly on the Cradle.
5
IR port
This port transfers data with the DT-300 IR port non-contact data
communication.
6
Power contacts
Power is supplied to the DT-300 via these contacts.
7
Power switch
Turns the power on and off.
8
AC adaptor jack
Connect the AC adaptor here.
This lamp indicates whether the system is operating normally. Regardless
of whether or not an DT-300 is mounted this lamp indicates the system
status and whether or not a communication operation with the system can
be performed.
Off
: System is not operating.
9 System
status
indicator lamp
(LINE)
Green
: System is operating.
<Front>
<Top>
<Right Side>
<Back>
<Bottom>
Fig. 2.2