
E-22
Playing a Built-in Tune
Looping a Musical Phrase
You can select one or more measures and “loop” them, which
means that they play again and again until you stop playback.
1
While the tune is playing, press the REPEAT button
while the measure you want to start from is playing.
• This causes the repeat indicator to flash on the display.
2
When playback is within the measure you want to
specify as the end of the loop, press the REPEAT
button again.
• This causes the repeat indicator to light on the display.
• To cancel repeat play of a loop, press the REPEAT
button again so the repeat indicator is not displayed.
To change the melody tone
1
Press the TONE button.
2
Find the tone you want in the TONE List, and then
use the number buttons to input its three-digit
number.
Example:
To select “131 VIOLIN”, input 1, then 3, then
1.
• You can select any one of the keyboard’s built-in tones.
NOTE
• You can also use the [+] and [–] buttons to change the
melody tones.
• Specifying the tune number for the same tune that is
currently selected returns the melody tone to the default
setting for that tune.
V i o l i n
Indicator
appears
To play all tunes in succession
1
Press the RHYTHM button and TONE button at the
same time.
• Playback starts from Song Bank tune number 001.
2
To stop tune play, press the PLAY/STOP button.
NOTE
• While a tune is playing, you can use the number buttons
or [+] and [–] to change to another tune.
• You can play along with the tunes on the keyboard.
CTK810IN_e_20-27.p65
07.4.10, 3:47 PM
22
Summary of Contents for CTK-810IN
