English
EN-19
Reference
Perform the following procedure when you want to return the Digital Keyboard’s stored data and settings to their initial factory
defaults.
1.
Turn off the Digital Keyboard.
2.
While holding down
8
SONG BANK
and the [0] 10-key (
9
) key at the same time, press
1
P
(Power).
•
You will be able to use the Digital Keyboard in a short while after its system is initialized.
In certain keyboard ranges, the volume and tone
quality sound are slightly different from those in
other keyboard ranges.
This is due to system limitations. It does not indicate malfunction.
With some tones, octaves do not change at the far
ends of the keyboard.
This is due to system limitations. It does not indicate malfunction.
The pitch of the notes does not match other
accompanying instruments or sounds strange when
played long with other instruments.
•
Check and adjust the transpose (page EN-4) and tuning settings
(page EN-4).
•
Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-8).
The reverb of notes seems to change suddenly.
Turn power off and then back on to initialize all Digital Keyboard
settings (page EN-8).
Returnin
g
the Di
g
ital Keyboard to Its Factory Default Settin
g
s
Symptom
Action
CTK1500-ES-1A.indd 21
2016/08/10 15:32:11
