Casio CELVIANO AP-31 User Manual Download Page 4 | Manualshive

Page: 4 / 50

background image

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the re-

ceiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

427B-E-004A

AP31/33_ES_cover.p65

03.10.7, 11:00 AM

Page 4

Adobe PageMaker 6.5J/PPC

«
...
2
3
4
5
6
...
»

Summary of Contents for CELVIANO AP-31



















































Reviews:

No comments

Related manuals for CELVIANO AP-31

Brand: M-Audio Pages: 51

Brand: M-Audio Pages: 70

Brand: M-Audio Pages: 16

Brand: Radio Shack Pages: 44

Brand: True Pages: 33

BlackWidow Ultimate Stealth Edition

Brand: Razer Pages: 25

Brand: Hama Pages: 15

MAGIC WATCH MWE-850-4XXL

Brand: Waeco Pages: 228

Brand: BIGFUN Pages: 4

uRage Illuminated

Brand: Hama Pages: 8

Smart Heavy-Duty Vehicle TPMS Solution

Brand: EverFocus Pages: 25

Brand: Star Trac Pages: 52

Brand: Star Trac Pages: 62

Brand: Hama Pages: 25

Brand: Radio Shack Pages: 2

Brand: Radio Shack Pages: 8

Brand: Trust Pages: 5

Brand: Edirol Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands