Casio Casiotone CT-S1, User Manual

Page: 33 / 82

Controlling the Sound of a Performance
EN-32
You can use the procedure below to layer two tones and output the resulting sound. The part that is
played using a single tone is the main part, while the second part that is layered over the main part is
the layer part.
1.
While holding down FUNCTION , press the C3 keyboard key.
This enables layering.
•
Each press of the keyboard key sounds a tone that lets you know what setting was selected.
High tone: On
Low tone: Off
2.
To select the layer part, hold down
FUNCTION
as you press the E3 keyboard key.
•
Do not release FUNCTION until step 3, below.
3.
Press a keyboard key within the range of C2 through C7 to select a tone.
This layers the tone you selected.
•
Each of the keyboard keys has a tone assigned to it. For tone information, see the “ Tone List ”
(page EN-76 ).
4.
Release
FUNCTION
to complete the setting operation.
5.
To cancel layering, hold down
FUNCTION
as you press the C3 keyboard key.
Layering Two Tones
Main part
Layer part
C2 C3 C4 C5 C6 C7 C3 C3 C3 C3
C3
C2 C3 C4 C5 C6 C7
E3