Casio 5699 Operation Manual Download Page 2

Precautions

Operating Precautions

Water Resistance

The information below applies to watches

with WATER RESIST or WATER

RESISTANT marked on the back cover.

Water Resistance Under Daily Use

Marking on watch front or on

back cover

No BAR

mark

Example of Daily Use

Hand washing, rain

Yes

Water-related work, swimming

No

Windsurfing

No

Skin diving

No

Enhanced Water Resistance Under Daily

Use

5 Atmospheres

Marking on watch front or on

back cover

5BAR

Example of Daily Use

Hand washing, rain

Yes

Water-related work, swimming

Yes

Windsurfing

No

Skin diving

No

10 Atmospheres

Marking on watch front or on

back cover

10BAR

Example of Daily Use

Hand washing, rain

Yes

Water-related work, swimming

Yes

Windsurfing

Yes

Skin diving

Yes

20 Atmospheres

Marking on watch front or on

back cover

20BAR

Example of Daily Use

Hand washing, rain

Yes

Water-related work, swimming

Yes

Windsurfing

Yes

Skin diving

Yes

Do not use your watch for scuba diving or

other types of diving that requires air tanks.

Watches that do not have WATER RESIST

or WATER RESISTANT marked on the

back cover are not protected against the

effects of sweat. Avoid using such a watch

under conditions where it will be exposed to

large amounts of sweat or moisture, or to

direct splashing with water.

Even if a watch is water resistant, note the

usage precautions described below. Such

types of use reduce water resistance

performance and can cause fogging of the

glass.

ー 

Do not operate the crown or buttons while

your watch is submersed in water or wet.

ー 

Avoid wearing your watch while in the

bath.

ー 

Do not wear your watch while in a heated

swimming pool, sauna, or any other high

temperature/high humidity environment.

ー 

Do not wear your watch while washing

your hands or face, while doing

housework, or while performing any other

task that involves soaps or detergents.

After submersion in seawater, use plain

water to rinse all salt and dirt from your

watch.

To maintain water resistance, have the

gaskets of your watch replaced periodically

(about once every two or three years).

A trained technician will inspect your watch

for proper water resistance whenever you

have its battery replaced. Battery

replacement requires the use of special

tools. Always request battery replacement

from your original retailer or from an

authorized CASIO service center.

Some water-resistant watches come with

fashionable leather bands. Avoid

swimming, washing, or any other activity

that causes direct exposure of a leather

band to water.

The inside surface of the watch glass may

fog when the watch is exposed to a sudden

drop in temperature. No problem is

indicated if the fogging clears up relatively

quickly. Sudden and extreme temperature

changes (such as coming into an air

conditioned room in the summer and

standing close to an air conditioner outlet,

or leaving a heated room in the winter and

allowing your watch to come into contact

with snow) can cause it to take longer for

glass fogging to clear up. If glass fogging

does not clear up or if you notice moisture

inside of the glass, immediately stop using

your watch and take it to your original

retailer or to an authorized CASIO service

center.

Your water-resistant watch has been tested

in accordance with International

Organization for Standardization

regulations.

Band

Tightening the band too tightly can cause

you to sweat and make it difficult for air to

pass under the band, which can lead to skin

irritation. Do not fasten the band too tightly.

There should be enough room between the

band and your wrist so you can insert your

finger.

Deterioration, rust, and other conditions can

cause the band to break or come off of your

watch, which in turn can cause band pins to

fly out of position or to fall out. This creates

the risk of your watch falling from your wrist

and becoming lost, and also creates the risk

of personal injury. Always take good care of

your band and keep it clean.

Immediately stop using a band if you even

notice any of the following: loss of band

flexibility, band cracks, band discoloration,

band looseness, band connecting pin flying

or falling out, or any other abnormality. Take

your watch to your original retailer or to a

CASIO service center for inspection and

repair (for which you will be charged) or to

have the band replaced (for which you will

be charged).

Watch Operation Guide 5699

2

Summary of Contents for 5699















Reviews: