Casio 5666 Operation Manual Download Page 9

Remaining Charge and Dead Battery

You can determine if the charge level is low by
checking the hand movement. Functions
become disabled as battery power goes low.

Important!

Should the battery go low or go dead,
expose the face (solar panel) to light as
soon as possible.

Note

Exposing the watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.

Low Battery Power
The second hand jumps at two-second
intervals.

30

Second hand

Dead Battery
All hands and the day indicator are stopped.

1

Charging Time Guidelines

The table below shows guidelines for
approximate charging times.

Charging Times Required for 1 Day of
Operation

Light Level (Lux)

Approximate

Charging Time

50,000

8 minutes

10,000

30 minutes

5,000

48 minutes

500

8 hours

Times Required to Achieve Next Charge
Level

Sunny day, outdoors (50,000 lux)

Dead battery 

n

 Medium

charge

2 hours

Medium charge 

n

 High

charge

17 hours

High charge 

n

 Full charge

5 hours

Sunny day, near a window (10,000 lux)

Dead battery 

n

 Medium

charge

5 hours

Medium charge 

n

 High

charge

64 hours

High charge 

n

 Full charge

17 hours

Overcast day, near a window (5,000 lux)

Dead battery 

n

 Medium

charge

8 hours

Medium charge 

n

 High

charge

103 hours

High charge 

n

 Full charge

28 hours

Indoor fluorescent lighting (500 lux)

Dead battery 

n

 Medium

charge

90 hours

Medium charge 

n

 High

charge

-

High charge 

n

 Full charge

-

Note

Actual charging time depends on the
local charging environment.

Power Saving

Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and
5:50 a.m. will cause the second hand to stop,
and the watch to enter Level 1 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 2 power saving.

Level 1 :
Basic timekeeping functions are operational.

Level 2 :
Only the day indicator is operational.

Note

Note that the watch also may enter the
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.

The watch will enter power saving
when it is in one of the modes below.

ー 

Calendar Mode

ー 

Stopwatch Mode (reset to all zeros)

Recovering from Power Saving
Operation

Press any button, perform a crown operation,
or place the watch in a well-lit area to recover
from power saving.

Watch Operation Guide 5666

9

Summary of Contents for 5666
























Reviews: