Casio 5665 Operation Manual Download Page 20 | Manualshive

Page: 20 / 28

Casio 5665 Operation Manual Download Page 20

Using the Watch in a Medical

Facility or Aircraft

Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.

1.

Enter the World Time Mode or the
Stopwatch Mode with the stopwatch reset
to all zeros.

l

Navigating Between Modes

l

Measuring Elapsed Time

2.

Press (B).

The second hand will indicate the last
receive result for nine or ten seconds.

30

3.

Within 10 seconds after pressing (B)
above, pull out the crown to the first click.

●

If more than 10 seconds elapse before
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.

4.

Rotate the crown to disable auto time
adjustment.

[Y(YES)]: Auto time adjustment enabled.
[N(NO)]: Auto time adjustment disabled.

30

Crown

5.

Push the crown back in.

Note

●

If the watch is paired with a phone,
CASIO WATCHES can be used to
disable auto time adjustment.

l

Using CASIO WATCHES to
Disable Auto Time Adjustment

World Time

World Time lets you look up the current time
in any one of 27 cities and 38 time zones
around the globe.

30

Using CASIO WATCHES to

Configure World Time City

Settings

If the watch is paired with a phone, you can
also use CASIO WATCHES to set the World
Time city.

l

Configuring World Time Settings

Note

●

World Time cities that can be selected
only by using CASIO WATCHES
cannot be selected using watch
operations.

World Time City Setting

Use the procedure below to specify the city
(time zone) whose time you want to view.

1.

Enter the World Time Mode.

l

Navigating Between Modes

2.

Pull out the crown to the first click.

The second hand will point to the currently
selected World Time City.

30

Crown

World Time City (time zone)

3.

Rotate the crown to change the World
Time City (time zone).

The World Time hour and minute hands
indicate the current time in the selected
time zone.

●

You can also select a time zone whose
name is not indicated on the face of the
watch.

●

For details about time zones, refer to the
information below.

l

30

Crown

World Time hour (24-hour)

World Time hour and minute

4.

Push the crown back in.

Watch Operation Guide 5665

20

«
...
18
19
20
21
22
...
»

Summary of Contents for 5665





























Reviews:

No comments