Casio 5659 Operation Manual Download Page 25

Specifications

Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by communication with a phone is
not possible.

Timekeeping :

Analog

Hour, minute (moves every 20 seconds)

Digital

Hour, minute, second, month, day, day of
the week
a.m./p.m.(P)/24-hour timekeeping
Full Auto Calendar (2000 to 2099)
Summer Time

World Time :

38 cities (38 time zones) and Coordinated
Universal Time (UTC)
Summer time
Home Time swapping

Stopwatch :

Measuring unit: 1 second
Measuring range: 60 minutes
Measurement Functions:

Elapsed time, split times, lap times

Timer :

Measuring unit: 1 second
Measuring range: 60 minutes
Time setting unit: 1 second
Time setting range: 1 second to 60 minutes
10-second beeper when the end of the
countdown is reached

Alarm :

Time alarms

Number of alarms

5

Setting units

Hours, minutes

Alarm tone duration: 10 seconds
Hourly time signal: Beep every hour on the
hour

Mobile Link :

Auto Time Correction

Time setting adjusted automatically at
preset time.

One-touch Time Correction

Manual connection and time adjustment

Phone finder

Watch operation sounds the alert sound
of the mobile phone.

World Time

Current time for approximately 300 cities
selected for the watch
Home Time/World Time swapping

Auto Summer Time Switching

Automatic switching between standard
time and summer time.

Timer Settings
Alarm Settings
Reminder

Reminds you of anniversaries and other
important dates.

Hand alignment correction
Data Communication Specifications

Bluetooth

®

Frequency Band: 2400MHz to 2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)

Double LED light :

Face LED light: Super Illuminator,
afterglow, selectable illumination duration
(approximately 1.5 seconds or 3 seconds)
LCD LED backlight: Super Illuminator,
afterglow, selectable illumination duration
(approximately 1.5 seconds or 3 seconds)

Other :

Power Saving, battery charge alert,
selectable date format, selectable day of
the week language, auto time adjustment
enable/disable, operation tone enable/
disable, Hand Shift

Power Supply :

Solar panel and one rechargeable battery
Battery operating time: Approximately 7
months
Conditions:

Auto Time Adjustment: 4 times/day
Alarm: Once (10 seconds)/day
Illumination: Once (1.5 seconds)/day
Power Saving: 6 hours/day

Specifications are subject to change without
notice.

Copyrights and Registered

Copyrights

The Bluetooth

®

 word mark and logos are

registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.

iPhone and App Store are trademarks of
Apple Inc. in the United States and other
countries.

iOS is a trademark or registered trademark
of Cisco Systems, Inc.

GALAXY is a registered trademark of
Samsung Electronics Co., Ltd.

Android and Google Play

TM

 are trademarks

or registered trademarks of Google LLC.

Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.

Watch Operation Guide 5659

25

Summary of Contents for 5659





























Reviews: