Connection
Connecting with a Phone
Your watch can connect with a phone that is
paired with it.
●
If the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
●
Connecting with a Phone
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
e
.
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
●
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the Timekeeping Mode.
Trying to connect
Connected
Important!
●
If you have problems establishing a
connection, it could mean that
EDIFICE Connected is not running on
your phone. On your phone’s home
screen, tap the “EDIFICE Connected”
icon. After the app starts up, hold down
the watch’s (C) button for at least three
seconds.
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
EDIFICE Connected: “Watch settings”
n
“Connection time”. Next, select a
setting of 3 minutes, 5 minutes, or 10
minutes.
Disconnecting from Your Phone
Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Disconnected
Connected
Unpairing
Unpairing the watch from a phone requires
both EDIFICE Connected and watch
operations.
●
Deleting Pairing Information from
EDIFICE Connected
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to unpair.
●
Deleting Pairing Information from the
Watch
1.
X
Hold down (C) for at least one second
to enter the Timekeeping Mode.
2.
X
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
●
This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
3.
X
Press (C) twice.
This causes the seconds to flash.
Seconds
4.
X
Hold down (B) for at least three
seconds. This will cause the [PAIR] and
[CLR] indicators to alternate on the
display. Release the button when only
[CLR] is displayed.
This deletes the pairing information from
the watch and returns to the timekeeping
display.
5.
X
Press (A) to return to the Timekeeping
Mode.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
Deleting Pairing Information from the
Watch
l
Watch Operation Guide 5658
14