Casio 5658 Operation Manual Download Page 24

Page: 24 / 29

Specifying the Day of the

Week Language

You can select any one of six languages for
the day of the week display in the Timekeeping
Mode.

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.

●

This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.

Home City

Press (C) 10 times.

This causes the language setting to flash.

Use (D) to select a language.

[ENG]: English
[ESP]: Spanish
[FRA]: French
[DEU]: German
[ITA]: Italian
[PyC]: Russian

Press (A) to exit the setting screen.

Disabling the Countdown

Start Tone

You can use the procedure below to enable or
disable the countdown start tone that sounds
when the function hand starts a countdown
operation 30 minutes before an alarm time or
before the end of a timer operation.

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.

●

This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.

Home City

Press (C) 11 times.

This causes [PROGRESS♪] to appear.
Next, [♪ON] or [♪OFF] will flash on the
display.

Press (D) to select [♪ON] or [♪OFF].

[♪ON]: Tone enabled.
[♪OFF]: Tone disabled.

Press (A) to exit the setting screen.

Enabling the Button

Operation Tone

Use the procedure below to enable or disable
the tone that sounds when you press a button.

Enter the Timekeeping Mode.

Navigating Between Modes

Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.

●

This is the setting mode. The hands
automatically shift out of the way for
easy viewing of the display and other
indicators.

Home City

Press (C) 12 times.

This causes [KEY♪] or [MUTE] to flash on
the display.

Press (D) to select [KEY♪] or [MUTE].

[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.

Press (A) to exit the setting screen.

Note

●

Note that alarm and timer tones will still
sound even while the operation tone is
muted.

Watch Operation Guide 5658

Summary of Contents for 5658






























Search results

Summary of Contents for 5658

Reviews:

Related manuals for 5658

Brands by name

Popular brands

Casio 5658, Operation Manual

Search results

Summary of Contents for 5658

Reviews:

Related manuals for 5658

Brands by name

Popular brands