Casio 5636 Operation Manual Download Page 3

Mode Overview

Calendar Mode

The main hour, minute, and second hands

indicate the current time.
The small hour and minute hands show

another time (Dual Time).

30

④ ⑤ ⑥

Last Time 
Adjustment Result

Hand Shift

A

 

Current location time (24-hour time)

One revolution every 24 hours.

B

 

Day of the week at current location

C

 

Dual Time hour

D

 

Dual Time minute

E

 

Dual Time hour (24-hour hand)

The hand points to the A-side for a.m.

times, and to the P-side for p.m. times.

F

 

Current location date

Time Adjustment Using a Time Calibration

Signal
Hold down (D) for at least 0.5 seconds until the

second hand points to [RC].

A manual time calibration signal receive

operation cannot be performed while the

watch is paired with a phone.

Swapping the Current Location Time and

Dual Time
Hold down (B) for at least three seconds.
Connecting with a Paired Phone to Adjust

the Watch’s Time
Hold down (D) for at least 0.5 seconds until the

second hand points to [C].
Searching for a Paired Phone
Hold down (D) for at least five seconds.

Stopwatch Mode

The second hand, and the small hour and

minute hands indicate the elapsed stopwatch

time.

The main hour and minute hands indicate

the current time.

30

② ③ ④

Start/Stop

Reset

A

 

Stopwatch seconds

B

 

Stopwatch hours

C

 

Stopwatch minutes

D

 

Stopwatch hours (24-hour time)

The hand points to the A-side for hours 0

through 12, and to the P-side for hours 12

through 24.

Timer Mode

The second hand, and the small hour and

minute hands indicate the current countdown

time.

The main hour and minute hands indicate

the current time.

30

②③ ④

Start/Stop

Reset

A

 

Timer seconds

B

 

Timer hours

C

 

Timer minutes

D

 

Timer hours (24-hour time)

The hand points to the A-side for hours 0

through 12, and to the P-side for hours 12

through 24.

Alarm Mode

The small hour and minute hands indicate the

alarm time.

The second hand indicates the alarm enabled/

disabled setting.

The main hour and minute hands indicate

the current time.

30

② ③ ④

Hand Shift

Enabling/
Disabling the 
Alarm

A

 

Alarm enabled/disabled

B

 

Alarm hour

C

 

Alarm minute

D

 

Alarm hour (24-hour time)

The hand points to the A-side for a.m.

times, and to the P-side for p.m. times.

Using the Crown

The watch’s crown is a screw-in (screw lock)

type. To use the crown, you first need to rotate

it towards you (leftwards) to loosen it.

Loosen

Crown

Important!

To prevent loss of water resistance

and/or damage due to impact, be sure

to screw the crown in by rotating it

away from you as you push it in.

Screw in

When pushing the crown back in, take

care not to apply too much force.

Watch Operation Guide 5636

3

Summary of Contents for 5636
























Reviews: