Operation Guide 5627
E-39
3. Press
C
to move the flashing in the sequence shown below to select the other
settings.
DST
Hour
Minutes
C
C
C
4. When the setting you want to change is flashing, use
B
and
D
to change it as
described below.
Screen
To do this:
Do this:
Toggle between Daylight Saving Time
(
On
) and Standard Time (
OF
)
Press
D
.
Change the hours or minutes
Use
D
(+) and
B
(–).
5. Press
A
to exit the setting screen.
x
The
DST
indicator on the Dual Time Mode screen indicates that DST is turned
on for the Dual Time Mode time.
E-38
Dual Time
The Dual Time Mode lets you keep track of time in a
different time zone. You can select Standard Time or
Daylight Saving Time for the Dual Time Mode time.
x
In the Dual Time Mode, the seconds count is
synchronized with the seconds count of the current
digital time.
To set the Dual Time
1. Press
C
to enter the Dual Time Mode (page E-7).
2. In the Dual Time Mode, hold down
A
until the DST
setting starts to flash, which indicates the setting
screen.
Dual time
(Hour : Minutes)
Timekeeping Mode time
DST indicator
E-37
To select the operation of Alarm 1
1. In the Alarm Mode, use
D
to select Alarm
1
.
2. Press
A
to cycle through the available settings in the sequence shown below.
A
SNZ
A
A
Alarm on
Snooze
feature on
Alarm off
x
The applicable alarm on indicator (
SNZ
) is displayed in all modes when an
alarm is turned on.
x
SNZ
indicator flashes during the 5-minute intervals between alarms.
x
The alarm indicator (
and/or
SNZ
) flashes while the alarm is sounding.
E-36
To turn Alarms 2 and 3, and the Hourly Time Signal on and off
1. In the Alarm Mode, use
D
to select alarm
2
or
3
, or the
Hourly Time Signal (
:00
).
2. Press
A
to toggle it on and off.
x
Turning on alarm
2
or
3
displays the alarm on indicator
on its screen.
x
Turning on the Hourly Time Signal displays the hourly
time signal on indicator.
x
The alarm on (
) indicator and Hourly time Signal on
(
) indicator are displayed in all modes.
Alarm on indicator
Hourly time signal on
indicator
E-35
5. Press
A
to exit the setting screen.
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in. While the snooze function is turned on, the alarm operation will repeat
every five minutes up to seven times, or until the alarm or snooze function is turned
off.
x
To stop the alarm tone after it starts to sound, press any button.
x
Performing any one of the operations below during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-9)
Displaying the alarm
1
setting screen (page E-33)
To test the alarm
In the Alarm Mode, hold down
D
to sound the alarm.
E-34
3. Press
C
to move the flashing in the sequence shown below to select other
settings.
Hours
Minutes
Day
C
C
C
Month
C
4. While a setting is flashing, use
D
(+) and
B
(–) to change it.
x
To set an alarm that does not include a month (daily alarm, monthly alarm),
set for the month. Use
D
and
B
until the mark appears (between 12 and
1) while month setting is flashing.
x
To set an alarm that does not include a day (daily alarm, 1-month alarm), set
for the day. Use
D
and
B
until the
mark appears (between the end
of the month and 1) while the day setting is flashing.
x
When setting the alarm time using the 12-hour format, take care to set the
time correctly as a.m. (no indicator) or p.m. (
P
indicator).
E-33
To set an alarm time
1. In the Alarm Mode, use
D
to scroll through the alarm
screens until the one whose time you want to set is
displayed.
–1
–2
:00
D
D
D
D
–3
x
Alarm
1
has a snooze feature.
x
The snooze alarm operation repeats every five minutes.
2. After you select an alarm, hold down
A
until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
x
This operation automatically turns on the alarm.
E-32
Alarm Types
The alarm type is determined by the settings you make, as described below.
x
Daily alarm
Set the hour and minutes for the alarm time. This type of setting causes the alarm to
sound everyday at the time you set.
•
Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
•
1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
alarm to sound everyday at time you set, only during the month you set.
•
Monthly alarm
Set the day, hour and minutes for the alarm time. This type of setting causes the
alarm to sound every month at the time you set, on the day you set.
E-31
Alarms
You can set up to three independent multi-function alarms
with hour, minutes, month, and day. When an alarm is
turned on, the alarm tone sounds when the alarm time is
reached. One of the alarms has a snooze feature.
You can also turn on an Hourly Time Signal that causes
the watch to beep twice every hour on the hour.
x
There are three alarms numbered
1
through
3
. The
Hourly Time Signal screen is indicated by
:00
.
x
All of the operations in this section are performed
in the Alarm Mode, which you enter by pressing
C
(page E-7).
Alarm time
(Hour : Minutes)
Alarm date (Month – Day)
Alarm number
E-30
3. While a setting is flashing, use
D
and
B
to change it as described below.
Screen
To do this:
Do this:
Change the hours or minutes
Use
D
(+) and
B
(–).
Toggle auto-repeat on (
On
) and off (
OF
)
Press
D
.
x
To specify a countdown start time of 24 hours, set
0:00
.
4. Press
A
to exit the setting screen.
x
The auto-repeat on indicator (
) is displayed on the Countdown Timer Mode
screen while this function is turned on.
x
Frequent use of auto-repeat and the alarm can run down battery power.