Casio 5623, Operation Manual

Page: 12 / 26

Note
●
If the watch does not indicate the
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
l
Adjusting Hand and Day Indicator
Alignment
●
If there is a World Time City specified
with G-SHOCK Connected, its time will
also be adjusted automatically.
●
Auto time adjustment is performed at
the times described below.
ー
After your phone’s time zone or
summer time setting is changed
ー
After 24 hours or more have passed
since the last time adjustment using
Bluetooth connection
ー
After 24 hours or more have passed
since city swapping using G-
SHOCK Connected or watch
operation
ー
After 24 hours or more have passed
since the last home city change or
time adjustment using watch
operation
●
Watch operation can be performed
even while it is connected with your
phone.
●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2.
X Enter the Calendar Mode.
l
Navigating Between Modes
3.
X Hold down (D) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch’s time setting
will be adjusted.
30
Viewing Diving Log Data
You can use G-SHOCK Connected to view
Diving Log data.
●
The items below can be viewed.
ー
Dive start date and time
ー
Dive time
ー
Surface interval
ー
Location information
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to view Diving Log data.
Specifying a Port
After you use G-SHOCK Connected to specify
a port, you can use the watch to view the
current time and tide level at the port.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
Note
●
You can use G-SHOCK Connected to
specify any one of 3,300 points around
the world as the port.
1.
Y Tap the “G-SHOCK Connected” icon.
2.
Y Perform the operation shown on the
phone screen to specify a port.
Configuring World Time
Settings
Specifying a World Time City with G-SHOCK
Connected causes the watch’s World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
●
Enter the Calendar Mode and then press
(D). Next, check to make sure that the
second hand is pointing to [Y(YES)].
●
If the second hand is not pointing to
[Y(YES)], refer to the information at the link
below.
l
Connecting with a Phone
30
Note
●
G-SHOCK Connected World Time lets
you select from among approximately
300 cities as the World Time City.
●
Selecting a World Time City
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
●
You can determine whether a World
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
30
World Time hour (24-hour)
World Time hour and minute
Operation Guide 5623
12