Operation Guide 5607
E-19
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 29 time zones (48 cities) around the globe.
The city that is currently selected in the World Time
Mode is called the “World Time City”.
To enter the World Time Mode
Use
C
to select the World Time Mode as shown on
page E-8.
To view the time in another time zone
In the World Time Mode, use
D
(East) to scroll through
city codes.
Current time in the currently
selected World Time City
Currently selected
World Time City
E-18
Note
x
For information about selecting a Home City and configuring the DST setting, see
“Configuring Home City Settings” (page E-12).
x
While 12-hour format is selected for timekeeping, a
PM
indicator will appear for
times from noon to 11:59 p.m. No indicator appears for times from midnight to
11:59 a.m. With 24-hour format, time is displayed from 0:00 to 23:59, without any
PM
indicator.
x
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x
The day of the week changes automatically when the date changes.
E-17
3. When the timekeeping setting you want to change is flashing, use
D
and/or
B
to change it as described below.
Screen
To do this:
Do this:
Reset the seconds to
00
Press
D
.
Toggle between Daylight Saving Time
(
ON
) and Standard Time (
OFF
)
Press
D
.
Change the city code
Use
D
(East) and
B
(West).
Change the hour or minute
Use
D
(+) and
B
(–).
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping
Press
D
.
Change the year, month, or day
Use
D
(+) and
B
(–).
4. Press
A
to exit the setting mode.
E-16
2. Press
C
to move the flashing in the sequence shown below to select the other
settings.
Time and Date
Seconds
C
DST
C
Home City Code
C
Hour
C
C
Day
C
Month
C
Year
C
12/24-Hour Format
C
Minute
x
The following steps explain how to configure timekeeping settings only.
E-15
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down
A
for at least
two seconds until the seconds start to flash. This is the
setting mode.
Seconds
E-14
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
for at least
two seconds until the seconds start to flash. This is the
setting mode.
2. Press
C
to display the DST setting mode.
3. Press
D
to toggle between Daylight Saving Time (
ON
)
and Standard Time (
OFF
).
4. After the setting is the way you want, press
A
to
return to the Timekeeping Mode.
x
The
DST
indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
E-13
2. Press
C
twice to move the flashing to the city code.
x
For details about city codes, see the “City Code
Table” at the back of this manual.
3. Press
D
(East) and
B
(West) to select the city code
you want to use as your Home City.
4. After the setting is the way you want, press
A
to
return to the Timekeeping Mode.
Note
x
After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
*
Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
City Code
E-12
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down
A
for at least
two seconds until the seconds start to flash. This is the
setting mode.
x
The watch will exit the setting mode automatically if
you do not perform any operation for about two or
three minutes.
Seconds
E-11
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
x
Each press of
D
toggles the digital display between the two formats shown
nearby.
D
Hour
PM indicator
Minutes
Month-Day
Hour : Minutes
Day of the week
Seconds
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the
modes.
Auto Return Features
If you leave a setting mode with flashing digits on the display for two or three
minutes without performing any operation, the watch exits the setting mode
automatically.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears first.
Scrolling
The
B
and
D
buttons are used on the setting mode to scroll through data on the
display. In most cases, holding down these buttons during a scroll operation scrolls
through the data at high speed.
