Operation Guide 5479
E-29
Alarms
You can set three independent Daily Alarms. When an
alarm is turned on, the alarm tone sounds when the alarm
time is reached. One of the alarms is a snooze alarm,
while the other two are one-time alarms.
You can turn on an Hourly Time Signal that causes the
watch to beep twice every hour on the hour.
x
There are four screens in the Alarm Mode. Two are for
one-time alarms (indicated by numbers
AL1
and
AL2
),
one is for a snooze alarm (indicated by
SNZ
), and one is
for the Hourly Time Signal (indicated by
SIG
).
x
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing
C
(page E-7).
AM indicator
Alarm time
(Hour : Minutes)
E-28
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use
D
to display the city
code whose Standard Time/Daylight Saving Time
setting you want to change.
2. Hold down
A
until the DST On/Off setting of the world
time starts to fl ash, which indicates the setting screen.
3. Press
D
to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (
OFF
displayed).
4. Press
A
to exit the setting screen.
x
The
DST
indicator appears on the World Time Mode display to indicate that
Daylight Saving Time is turned on.
x
The above operation toggles all World Time city codes between Daylight Saving
Time and Standard Time. Note that you cannot make settings for individual city
codes.
E-27
4. While a setting is fl ashing, use
D
and
B
to change it.
x
Pressing
D
and
B
at the same time while any World Time setting is fl ashing
causes the displayed time to change to the same setting as the current
Timekeeping Mode time.
x
While DST On/Off setting is selected (fl ashing), press
D
to toggle between
Daylight Saving Time (
ON
) and Standard Time (
OFF
).
x
While the hour or minutes setting is selected (fl ashing), use
D
(+) and
B
(–) to
change it.
5. Press
A
to exit the setting screen.
To view the time in another city code
In the World Time Mode, press
D
to scroll through city codes.
E-26
x
If your location is not included in the preset city codes, select the preset city code
that is in the same time zone as your location.
x
For full information on city codes, see the “City Code Table” at the back of this
manual.
To set the World Time
1. In the World Time Mode, press
D
to scroll through
city codes.
2. Hold down
A
until the DST On/Off setting of the
world time starts to fl ash, which indicates the setting
screen.
3. Press
C
to move the fl ashing in the sequence shown
below to select the other settings.
DST
Hour
Minutes
C
C
C
E-25
World Time
World Time digitally displays the current time in 30 cities
(29 time zones) around the world.
x
All of the operations in this section are performed in
the World Time Mode, which you enter by pressing
C
(page E-6).
World Time
The time settings of the Timekeeping Mode and the
World Time Mode are independent of each other, so
you must make separate settings for each. This watch
is preset with a number of city codes, each of which
represents the time zone where that city is located.
x
Whenever you change the time setting for any city in the World Time Mode, the
settings of all other cities are changed accordingly.
City code
Current time for the
selected city code
E-24
3. Press
B
and
D
at the same time to delete the record.
x
CLR
appears to indicate that the record is being deleted. After the record is
deleted, the cursor appears on the display, ready for input.
4. Input data or press
A
to return to the Telememo record screen.
E-23
To edit a Telememo record
1. In the Telememo Mode, use
D
to scroll through the records and display the one
you want to edit.
2. Hold down
A
until the fl ashing cursor appears on the display.
3. Use
C
to move the fl ashing to the character you want to change.
4. Use
B
and
D
to change the character.
x
For details on inputting characters, see “To create a new Telememo record”
(step 3 for name input and 7 for number input).
5. After making the changes that you want, press
A
to store them and return to the
Telememo record screen.
To delete a Telememo record
1. In the Telememo Mode, use
D
to scroll through the records and display the one
you want to delete.
2. Hold down
A
until the fl ashing cursor appears on the display.
E-22
To recall Telememo records
In the Telememo Mode, press
D
(+) to scroll through Telememo records on the
display.
x
Only name data appears when you scroll through Telememo records.
x
Press
A
to toggle the screen between the name and number fi elds.
Name
Number
A
x
The name and number scroll from right to left on the display. A separator (
s
) is
inserted between the last character and fi rst character of the data.
x
Pressing
D
while the last Telememo record is on the display causes the new data
screen to appear.
E-21
10. Press
A
to store your data and return to the Telememo record screen (without
the cursor).
x
After you press
A
to store data, the name fl ashes for about one second to
indicate that records are being sorted.
x
Note that a record must have something input in the name fi eld, otherwise you
will not be able to store it.
E-20
x
The name fi eld has spaces for eight characters, so you must press
C
to move
the past the 8th character in order to get to the number fi eld.
x
The number fi eld has spaces for 16 digits. Pressing
C
until the cursor moves
past the 16th digit causes it to jump back to the fi rst character of the name fi eld.
7. Use
D
and
B
to change the character at the cursor position in the number
fi eld. The character changes in the following sequence.
(space)
0
to
9
(
+
)
–
D
D
D
D
D
B
D
B
B
B
B
B
8. When the character you want is at the cursor position, press
C
to move the
cursor to the right.
9. Repeat steps 7 and 8 until you complete number input.
x
You can input up to 16 digits for the number.