Operation Guide 5478
E-59
Specifications
Accuracy at normal temperature:
±15 seconds a month
Digital Timekeeping:
Hour, minutes, seconds, p.m. (PM), month, day, day of the
week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping:
Hour, minutes (hand moves every 20 seconds)
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99"
Measuring modes: Elapsed time, split time, two finishes, One-press timing start
from the Timekeeping Mode, Target Time Alert
E-58
Dial Hand
The dial hand indicates the information below in each mode.
Mode
Dial Hand Indication
Timekeeping
Mode name
Stopwatch
Elapsed seconds
Countdown Timer
Seconds count
World Time
Mode name
Alarm
Mode name
E-57
Graphic
The graphic flashes in each mode as described below.
Mode
Flashing
Timekeeping
Seconds of current time
Stopwatch
Minutes of elapsed time measurement
Countdown Timer
Minutes of countdown
World Time
Seconds of current time
Synced with World Time seconds.
E-56
Main Indicators
Number
Name
See
1
1
Snooze alarm on indicator
E-47
2
2
Alarm on indicator
E-45
3
3
Hourly time signal on indicator
E-47
4
4
PM indicator
E-17
5
5
Hands shifted indicator
E-14
6
6
DST indicator
E-20, E-42
7
7
Target Time operation in
progress
E-30
1
6
5
4
3
2
7
E-55
Troubleshooting
Time Setting
■
The current time setting is off by hours.
Your Home City setting may be wrong (page E-18). Check your Home City setting and
correct it, if necessary.
■
The current time setting is off by one hour.
You may need to change your Home City’s standard time/daylight saving time
(DST) setting. Use the procedure under “Adjusting the Digital Time and Date
Settings” (page E-21) to change the standard time/daylight saving time (DST) setting.
World Time Mode
■
The time for my World Time City is off in the World Time Mode.
This could be due to incorrect switching between standard time and daylight saving
time. See “To specify standard time or daylight saving time (DST) for a city” (page E-42)
for more information.
E-54
3. Press
D
to toggle the setting between
KEY
(ON) and
MUTE
(OFF).
4. After all the settings are the way you want, press
A
to exit the setting screen.
E-53
Button Operation Tone
You can turn the button operation tone on or off as
desired.
x
Even if you turn off the button operation tone, the Target
Time Alert, alarms, the Hourly Time Signal, and other
beepers all operate normally.
To turn the button operation tone on and off
1. In the Timekeeping Mode, hold down
A
until the
flashing
SET Hold
indicator disappears from the
display and the currently selected city code flashes on
the left side of the upper display.
2. Press
C
nine times to display the button operation
tone On/Off screen (page E-22).
The screen will show either
KEY
or
MUTE
.
E-52
3. Press
C
.
x
This enters the hour and minute hand adjustment
mode.
x
Press
C
again* to enter the dial hand adjustment
mode.
*
Nothing will happen if you press
C
while the hands
are moving.
4. If the hour and minute hands are not at 12 o’clock,
use
D
(+) and
B
(–) to adjust them until they are.
x
Holding down either button scrolls at high speed.
5. Press
A
to return to the Timekeeping Mode.
Check to make sure that the time indicated by the
hands matches the time on the digital display. If the
times don’t match, perform the correction procedure
above again.
Hour hand and minute hand
E-51
1. In the Timekeeping Mode, hold down
A
for about
five seconds until
00
starts to flash. Release
A
after
00
flashes.
x
This indicates the dial hand adjustment mode.
2. If the dial hand is not at 0 o’clock, use
D
(+) and
B
(–) to move it there.
Dial hand
E-50
Adjusting Hand Positions
The watch hands can go out of alignment with the time on the digital display if it
is exposed to strong magnetism or impact. If this happens, you should adjust the
hand positions.
Important!
x
You do not need to perform the operation below as long as the analog hands
indicate the same time as the digital display.