Operation Guide 5245
E-29
@
0
6
1
4
2
3
7
9
8
5
Setting the year (ones digit)
Use
5.
D
to change the ones digit of the year
setting.
Each press of
x
D
will move the
x
Second
Hand
and change the ones digit of the
year setting.
After the ones digit of the year setting is the
6.
way you want, press
C
.
The watch will beep and change to the
x
month setting mode.
E-28
Use
3.
D
to change the tens digit of the year setting.
Each press of
x
D
will move the
x
Second Hand
and change the tens digit of the
year setting.
After the tens digit of the year setting is the way you want, press
4.
C
.
The watch will beep and change to the ones digit of the year setting mode.
x
E-27
To change the current date setting
@
00
60
10
40
20
30
70
90
80
50
Setting the year (tens digit)
In the Timekeeping Mode, keep
1.
A
depressed (for about fi ve seconds) as the
x
Second Hand
moves to the city code of the
currently selected Home City.
Press
2.
C
twice.
The watch will beep and change to the
x
year setting mode.
The year can be set in the range of 2000
x
to 2099.
You can save your settings and exit the
x
setting procedure at any time by pressing
A
, which will return to the Timekeeping
Mode. This will cause the
x
Second Hand
to move automatically to 12 o’clock and
resume normal movement from there.
E-26
Use
4.
D
(+) and
B
(–) to change the time (hour and minute) setting.
Each press of either button will move the hands (
x
z
Hour Hand
and
c
Minute
Hand
) one minute.
Holding down
x
D
or
B
will start high-speed
z
Hour Hand
and
c
Minute Hand
movement in the applicable direction. To stop high-speed hand movement,
press any button.
The
x
v
24-hour Hand
and
z
Hour Hand
move in sync with each other.
When setting the time, make sure that the
x
v
24-hour Hand
indicates the proper
a.m./p.m. hour.
If you want to change the date setting at this time, press
x
C
and perform the
procedure starting from step 3 under “To change the current date setting” (page
E-27).
After the time setting is the way you want, press
5.
A
to return to the Timekeeping
Mode.
This will cause the
x
x
Second Hand
to move automatically to 12 o’clock and
resume movement from there.
E-25
Change the Home City and daylight saving time (DST)
2.
settings, if you want.
For details about these settings, see steps 2 and
x
3 under “To confi gure Home City settings” (page
E-20).
In the following steps, each press of
x
C
cycles
between settings as shown below.
Home city/DST
Hour/Minute
Year (ones digit)
Day
Month
C
C
C
C
Year (tens digit)
C
C
Press
3.
C
.
The watch will beep, and the
x
x
Second Hand
and
n
Right Dial Hand
will move
to their 12 o’clock positions. This is the time setting mode.
B
+
6
>
@
E-24
Confi guring Current Time and Date Settings
You can confi gure current time and date settings.
To change the current time setting
In the Timekeeping Mode, keep
1.
A
depressed (for
about fi ve seconds) as the
x
Second Hand
moves to
the city code of the currently selected Home City.
At this time, the
x
n
Right Dial Hand
will indicate the
Home City’s current daylight saving time setting
(
STD
or
DST
).
6
@
E-23
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
x
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The
*
reference point for UTC is Greenwich, England.
E-22
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings” on page E-20.
1.
Each time you select a city code, the
x
z
Hour Hand
,
c
Minute Hand
, and
v
24-hour Hand
move to the current time for that city code. Do not perform the
next operation until these hands stop moving.
Press
2.
B
to toggle the time for the city code of the currently selected Home City
between
STD
(standard time)/
DST
(daylight saving time).
In the city code setting mode, the
x
n
Right Dial Hand
indicates the current
daylight saving time setting as
STD
(standard time) or
DST
(daylight saving
time).
Note that you cannot switch between
x
STD
(standard time)/
DST
(daylight saving
time) while
UTC
is selected as your Home City.
After the setting is the way you want, press
3.
A
to return to the Timekeeping Mode.
E-21
To change the Home City setting, press
2.
D
to move
the
x
Second Hand
clockwise.
Keep pressing
x
D
until the
x
Second Hand
is
pointing at the city code you want to select as your
Home City.
Each time you select a city code, the
x
z
Hour Hand
,
c
Minute Hand
,
v
24-hour Hand
and
m
Day
move
to the current time and date for that city code. Do
not perform the next operation until these hands
stop moving.
Press
3.
B
to toggle the time for the currently selected
city code between
STD
(standard time)/
DST
(daylight
saving time).
In the city code setting mode, the
x
n
Right Dial Hand
indicates the current
daylight saving time setting as
STD
(standard time) or
DST
(daylight saving time).
Note that you cannot switch between
x
STD
(standard time)/
DST
(daylight saving
time) while
UTC
is selected as your Home City.
After the setting is the way you want, press
4.
A
to return to the Timekeeping Mode.
B
+
@
6
>
5
E-20
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds
x
to Newfoundland.
In the Timekeeping Mode, keep
1.
A
depressed (for
about fi ve seconds) as the
x
Second Hand
moves to
the city code of the currently selected Home City.
This indicates the city code setting mode.
x
The watch will exit the setting mode automatically if
x
you do not perform any operation for about two or
three minutes.
For details about city codes, see the “City Code
x
Table” at the back of this manual.
@