Operation Guide 4782 (OC)
8
6.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–) buttons to change the flashing
setting.
a. When the 12/24-hour timekeeping setting is selected
Press
D
to toggle the timekeeping
format between 12-hour (“12H”
indicator) and 24-hour (“24H”
indicator).
b. When the seconds setting is selected
Press
D
to reset the seconds to 00
in accordance with the time signal
on the radio, TV, etc.
•
Pressing the
D
button while the
seconds count is in the range of
30 to 59 resets it to 00 and also
adds 1 to the minutes. Pressing
the
D
button in the range of 00
to 29 resets the seconds count
without changing the minutes.
c. When the hour, minutes, year, month, or day setting is
selected
Press the
D
button to increase the
selected setting or the
B
button to
decrease it.
•
Holding either button scrolls the
setting at high speed.
d. When the language setting is selected
Press the
D
button to toggle
between Japanese (kanji) and
English.
e. When the Power Saving setting is selected
While the Power Saving setting is
selected, press the
D
button to
toggle it ON and OFF.
12/24-hour Timekeeping
Resets to 00.
Hour Minute
(–)
(+)
Japanese (Kanji)
Configuring Analog Settings
You can use the Hand Setting Mode to adjust the analog time
manually when it does not match the digital time.
1.
Hold down the
A
A
A
A
A
button
for about two seconds.
•
This will cause the second
hand to move to 12 o’clock
and stop.
•
“-00-” will be flashing on the
digital display.
2.
If the second hand does
not align properly with the
12 o’clock position, press
the
D
D
D
D
D
button to adjust it.
•
Each press of the
D
button
advances the second hand
one second.
•
Holding down the
D
button
advances the hand at high
speed.
Hand Setting Mode
(+)
3.
Press the
C
C
C
C
C
button to
advance to setting of the
hour and minute hands.
•
This causes the hour and
minute digits to flash on the
digital display.
4.
Use the
D
D
D
D
D
(+) and
B
B
B
B
B
(–)
buttons to adjust the hour
and minute hands.
•
Each press of the
D
button
moves the hands 10 seconds
clockwise, while the
B
button
moves them 10 seconds
counterclockwise.
•
Holding down either button
changes the setting at high
speed.
High-speed Lock
•
You can use either of the following two operations to lock high-
speed hand movement.
Clockwise: Holding down the
D
button to start high-speed hand
movement, press
B
to lock it.
Counterclockwise: Holding down the
B
button to start high-
speed hand movement, press
D
to lock it.
•
High-speed movement will continue until it completes a 12-hour
cycle, or until you press any button to stop it.
5.
When the analog setting is the way you want, press the
A
A
A
A
A
button.
•
This exits the setting screen and synchronizes the minute
hand with the current seconds count automatically.
•
At this time, the second hand will adjust automatically to the
digital time.
•
The setting screen also will be exited automatically if you do
not perform any operation for about two or three minutes.
(–)
(+)
•
When setting the hour, make sure you specify AM (no indicator) or
PM (P) correctly when using 12-hour timekeeping, or that you
specify the correct 24-hour time.
•
You can set the year within the range of 2000 to 2099. The day of
the week is set automatically in accordance with the date you set.
•
The watch makes adjustments for leap years and month lengths
automatically.
7.
When the settings are the way you want, press the
A
A
A
A
A
button to exit the setting screen.
•
The setting screen also will be exited automatically if you do
not perform any operation for about two or three minutes.
Digital-Analog Synchronization
After adjustment of the digital time, the watch will adjust its analog
setting automatically to match.
•
When adjusting the analog time, the hands may move clockwise
or counterclockwise.
•
Depending on how many hours different the digital and analog
time settings are, it may take some time for the analog hand
setting procedure to be finished.
•
After adjustment of the hour and minute hand, the second hand
will adjust automatically to the digital time.