2
Operation Guide 4754
3. Press
C
to toggle between Summer Time (
displayed) and Standard Time (
displayed).
4. Press
A
to exit the setting screen.
•
The SMT indicator appears on the screen to indicate that Summer Time is turned
on.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of your Home City time.
To adjust the analog time
Crown (Normal position)
First click
1. In the Timekeeping Mode, pull the crown out when the second hand reaches the 12
o’clock position. This will stop the second hand.
2. Rotate the crown to adjust the hands. When adjusting the minute hand to its final
setting, move it to about four or five minutes past the time you want to set and then
back it up to the final setting.
3. When the digital time display reaches 00 seconds, push the crown back in to the
normal position to restart analog timekeeping.
Viewing the time in another city
To view the time in another city
In the Timekeeping Mode, use
B
and
C
to scroll through the city codes.
Press
B
to scroll eastward through the city codes.
Press
C
to scroll westward through the city codes.
•
For full information about city codes, see the “City Code Table”.
•
If the current time shown for a city is wrong, check your Home City time settings
and make the necessary changes.
City code
SMT indicator
Day of week
Month.Day for
the selected city code
City code
PM indicator
On/Off status
Alarm time for
the selected city code
Screen
To do this:
Change the month
Change the day
Change the year
Do this:
Press
C
.
Calendar
The watch’s calendar normally makes allowances for
different month lengths and leap years.
•
The same city code is displayed in the Calendar Mode
and the Timekeeping Mode. The city code that appears
first when you enter the Calendar Mode is the city code
that was on the display the last time you were in the
Timekeeping Mode.
•
All of the operations in this section are performed in the
Calendar Mode, which you enter by pressing
A
.
Setting the Date
To set the date
1. In the Calendar Mode, hold down
B
until the month
starts to flash, which indicates the setting screen.
2. Press
B
to move the flashing in the sequence shown
below to select the other settings.
Month
Day
(Exit the setting screen)
Year
3. When the setting you want to change is flashing, use
C
to change it as described
below.
4. Press
A
to exit the setting screen.
Viewing the calendar in another city
To view the calendar in another city
In the Calendar Mode, use
B
and
C
to scroll through the city codes.
Press
B
to scroll eastward through the city codes.
Press
C
to scroll westward through the city codes.
•
For full information about city codes, see the “City Code Table”.
Alarm
You can set the Daily Alarm. When the alarm is turned on,
the alarm tone sounds when the alarm time is reached.
•
In the Alarm Mode, you can specify a city code so the
alarm sounds when the time in the city code you specify
reaches the alarm time. For example, you can configure
the alarm to sound at 3:00 p.m. London time even if you
are in New York.
•
All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing
A
.
Hours
1/100 second
Minutes
Seconds
Screen
To do this:
Toggle between Alarm on (
) and Alarm off (
)
Change the City code
Change the hour or minutes
Do this:
Press
C
.
Press
C
(east).
Press
C
(+).
Countdown start time
To set the alarm time
1. In the Alarm Mode, hold down
B
until the alarm on/off status starts to flash, which
indicates the setting screen.
2. Press
B
to move the flashing in the sequence shown below to select the other
settings.
On/Off setting
City code
Hour
(Exit the setting screen)
Minutes
3. When the setting you want to change is flashing, use
C
to change it as described
below.
•
When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (AM indicator) or p.m. (PM indicator).
4. Press
A
to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode the
watch is in.
•
To stop the alarm tone after it starts to sound, press any button.
To test the alarm
In the Alarm Mode, hold down
C
to sound the alarm.
To turn the alarm on and off
1. In the Alarm Mode, hold down
B
until the alarm on/off
status starts to flash, which indicates the setting screen.
2. Press
C
to toggle it on (
displayed) and off
(
displayed).
•
Turning on the alarm displays the alarm on indicator on
the screen.
•
The alarm on indicator flashes while the alarm is
sounding.
Stopwatch
The stopwatch lets you measure elapsed time, and split
times.
•
The display range of the stopwatch is 11 hours,
59 minutes, 59.99 seconds.
•
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
•
Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
•
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing
A
.
To measure times with the stopwatch
Elapsed Time
Start
Stop
Re-start
Stop
Clear
Start
Split
Split release
Stop
Clear
Split Time
Display split time.
After about 10 seconds,
the display will change
automatically to elapsed time.
Countdown Timer
The countdown timer can be set within a range of one
minute to 60 minutes. An alarm sounds when the
countdown reaches zero.
•
You can set a start time in the range of 1 to 60 minutes
in 1-minute increments.
•
All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
A
.
To set the start time
In the Countdown Timer Mode, press
B
to change the start time.
To use the countdown timer
Press
C
while in the Countdown Timer Mode to start the
countdown timer.
•
The countdown timer operation continues even if you
exit the Countdown Timer Mode.
•
Press
C
while a countdown operation is in progress to
pause it. Press
C
again to resume the countdown.
•
To completely stop a countdown operation, first pause it
(by pressing
C
), and then press
B
. This returns the
countdown time to its starting value.
Countdown time
Minutes
Seconds