manualshive.com logo in svg

Casio 3523, Operation Manual, Page: 8 / 11

Share
Download
Casio 3523 Operation Manual Download Page 8

Enabling/Disabling an Alarm

or the Hourly Time Signal

1.

Enter the Alarm Mode.

l

Navigating Between Modes

2.

Press (B) to toggle the alarm or the hourly
time signal between on and off.

●

Each press of (B) toggles the displayed

 (alarm) or 

 (hourly time signal)

icon between on (displayed) and off (not
displayed).

Hourly time signal

Alarm

Alarm and hourly time signal off

Alarm beeper only

Hourly time signal beeper only

Alarm and hourly time signal on

Turning Off an Alarm or the

Hourly Time Signal

To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.

●

To have an alarm or hourly time signal
sound again, turn it back on.

1.

Enter the Alarm Mode.

l

Navigating Between Modes

2.

Press (B) to turn off the displayed alarm or
the hourly time signal.

●

Each press of (B) toggles the displayed

 (alarm) or 

 (hourly time signal)

icon between on (displayed) and off (not
displayed).

Hourly time signal

Alarm

Alarm and hourly time signal off

Alarm beeper only

Hourly time signal beeper only

Alarm and hourly time signal on

Stopwatch

The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59 seconds (24
hours).
When this maximum limit is exceeded,
elapsed time measurement returns to 0 and
timing continues from there.

Measuring Elapsed Time

1.

Enter the Stopwatch Mode.

l

Navigating Between Modes

2.

Use the operations below to measure
elapsed time.

B

B

B

B

Stop

Resume

Stop

Start

●

Elapsed time is shown in 1/100-second
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.

Hour, minute, second

Minutes, seconds, 

1/100 seconds

First hour

After first hour

3.

Press (A) to reset the measurement time
to all zeros.

Watch Operation Guide 3523

8

Summary of Contents for 3523












Reviews:

No comments