Casio 3521 Operation Manual Download Page 15

Interpreting the Moon Graph and Moon
Age Indicator

Moon phase

Moon age

This

indicator:

New Moon

0.0 to 0.9
28.7 to 29.8

 

1.0 to 2.7

 

2.8 to 4.6

 

4.7 to 6.4

First Quarter 6.5 to 8.3

 

8.4 to 10.1

 

10.2 to 12.0

 

12.1 to 13.8

Full Moon 13.9 to 15.7

 

15.8 to 17.5

 

17.6 to 19.4

 

19.5 to 21.2

Last Quarter 21.3 to 23.1

 

23.2 to 24.9

 

25.0 to 26.8

 

26.9 to 28.6

The Moon phase shown by the Moon graph
is the approximate shape of the Moon at
noon of the displayed date. It is meant only
to indicate whether the left or right side of
the Moon is shaded. Its shape is different
from the actual phase of the Moon.

The Moon phases shown in the above table
are for when the Moon is viewed towards
the south with respect to the northern
hemisphere. In the Southern Hemisphere or
near the equator, the light and dark portions
of the Moon are opposite those shown by
the watch’s indicator.

Checking the Tide Level and

Moon Age for a Specific Date

and Time

You can use the procedures in this section to
look up the tide level (Tide Graph) and Moon
age for a date or time you specify.

1.

Enter the Tide Graph/Moon Graph Mode.

l

Navigating Between Modes

Entering the Tide Graph/Moon Graph
Mode displays a Tide Search or Moon
Search screen.

2.

Press (A) to toggle between Tide Search
and Moon Search.

Hour, minute

Month, day

Tide Graph

Moon Search

Tide Search

Moon Graph

Moon age

The initial setting of Tide Search is 6:00
a.m.

To check the Tide Graph at the top of
each hour of the current day

1.

Enter the Tide Graph/Moon Graph Mode.

l

Navigating Between Modes

2.

Press (A) to display the Tide Search
screen.

3.

Use (D) to select the time whose Tide
Graph you want to view.

Each press of (D) advances the time by
one hour.

Holding down (D) scrolls through
settings at high speed.

Time

Tide Graph

To scroll the day and check information

1.

Enter the Tide Graph/Moon Graph Mode.

l

Navigating Between Modes

2.

Press (A) to display the Moon Search
screen.

3.

Use (D) to select the day whose Moon age
you want to view.

Each press of (D) advances by one day.

Holding down (D) scrolls through
settings at high speed.

Moon age

Month, day

4.

Press (A) to display the Tide Search
screen.

5.

Use (D) to select the time whose Tide
Graph you want to view.

Each press of (D) advances the time by
one hour.

Holding down (D) scrolls through
settings at high speed.

Time

Tide Graph

Month, day

Note

The watch automatically returns to the
Timekeeping Mode from the Tide
Graph/Moon Graph Mode after two or
three minutes of non-operation.

Watch Operation Guide 3521

15

Summary of Contents for 3521






















Reviews: