Operation Guide 3423
When ON is set for the snooze
alarm
a.
Alarm
indicator
b.
Snooze
indicator
When ON is set for the hourly
time signal
a.
Hourly
time
signal
indicator
Hold down
C
for about two
seconds.
[SET Hold] will appear,
"hour" will flash.
a.
Hour
Alarm
time
setting:
Each
press
of
B
moves
the
flashing
between
the
"hour"
and
the
"minute"
settings.
Use
D
and
A
to
change
the
setting
of
the
flashing
item.
Press
C
to
end
setting.
Press
B
three
times
to
return
to
the
Timekeeping
Mode.
Alarm
indicators:
Appropriate
indicators
light
when
the
alarm
and/or
hourly
time
signal
is
set
to
ON.
Alarm
set
to
ON
3.
4.
5.
a. Alarm indicator
Turning OFF an Alarm
Press
D
to select the alarm
screen whose settings you
want to change.
Press
A
to
set
OFF
for
alarm
and/or hourly time signal
operation.
1.
2.
Stopping the Alarm
When an alarm tone is sounding
or when vibrating, it can be
stopped by pressing any button
or by double-tapping the center
of the watch display.
Important!
With the snooze alarm, even
if the beep or vibration is
stopped by pressing any
button or by double tapping, it
will repeat at five-minute
intervals seven times. To stop
part way through, set snooze
alarm operation to OFF.
Timer
Performs a countdown of the set
time. When the remaining time
becomes zero, alert by beep or
vibration.
【
Preparation
】
The procedure here is performed
in the Timer Mode. Press
B
to
switch to the Timer Mode.
See:
Mode Switching
(Timer Mode)
Press
B
three times to return
to the Timekeeping Mode.
3.