Operation Guide 3407
E-49
c.
Alert method for notifi cation of incoming calls
d.
Alert method for notifi cation of incoming mail
e.
Alert method for notifi cation of other phone events
●
Use
D
to select the alert method.
: Alert by vibration
: Alert by tone
: Alert by vibration and tone
No icon : No alert by either tone or vibration
Alert is by display indication only.
Incoming call alert
method icon
E-48
b. Animation display on/off
●
Press
D
to toggle animation display between
on and off.
Note
Animation is not displayed in the case of alerts
other than those for incoming phone calls.
E-47
Confi guring Option Settings
◆
a. Alert duration for notifi cation from mobile phone
●
Press
D
to select an alert duration setting
(2 seconds, 3 seconds, 4 seconds).
●
You can also use this setting screen to change
the vibration type, if you want.
Press
B
to select a vibration type (A, b, C).
Note
The vibration type for the alarm and timer is fi xed
and cannot be change.
Alert duration
Vibration type
E-46
●
Confi gure option settings for each of the above items.
4
See “
◆
Confi guring Option Settings” below for details.
●
After all the settings are the way you want, press
5
A
to exit the setting
screen.
You can press
A
to exit the setting screen from any one of the option setting
screens.
●
To return to the Timekeeping Mode, press
6
C
.
E-45
●
Each press of
3
C
cycles through available settings in the sequence shown
below.
a. Alert duration for notifi cation
from mobile phone
C
b. Animation display on/off
d. Alert method for notifi cation of
incoming mail
e. Alert method for notifi cation of
other phone events
C
C
C
f. Alert method for alarm/timer
c. Alert method for notifi cation of
incoming calls
C
C
E-44
●
In the Timekeeping Mode, press
1
C
fi ve times to enter the Setup Mode.
See “Using Modes” (page E-14).
[SETUP] will appear on the display for about one second, and then the Mobile
Link information screen will appear.
Note
If you do not perform any operation for about two or three minutes while in the
Setup Mode, the watch will automatically return to the Timekeeping Mode.
●
In the Setup Mode, hold down
2
A
for about two seconds.
[SET Hold] will appear on the display. After that, [SET Hold] will disappear and
the screen for setting the alert duration for notifi cations from mobile phone will
appear.
E-43
Confi guring Option Settings
The items that can be confi gured as option settings are described below.
Item
Description
Notifi cation from
mobile phone
Alert duration setting
Specifi es the alert duration for incoming phone
calls, incoming mail, etc.
Animation display on/
off setting
Turns animation display on or off for incoming
phone calls.
Alert method setting
Specifi es tone and/or vibration for incoming
phone calls, incoming mail, etc.
Alarm/timer
Alert method setting
Specifi es tone or vibration for alarms and timer
time up alerts.
E-42
Setup
You can use the Setup Mode to check Mobile Link information and to confi gure
various option settings.
For information about Mobile Link information, visit the “User’s Guide for Mobile Link
Functions” page of the CASIO website.
E-41
Even if you exit the Timer Mode while a timer countdown is ongoing, the
x
countdown will continue and the tone/vibration alert operation will be
performed when the end of the countdown is reached.
To stop a tone/vibration alert operation
●
Double-tapping the center of the watch display or pressing any one of the
buttons will stop an ongoing tone/vibration alert operation.
E-40
●
Use
3
B
and
D
to change the hours and minutes settings.
Holding down either button scrolls the setting at high speed.
x
To specify a start time of 24 hours, set the timer to 0:00.
x
●
After all the settings are the way you want, press
4
A
to exit the setting
screen.
To perform a countdown
●
The following shows button operations for a countdown.
D
D
D
D
B
Start
Stop
(Restart)
(Stop)
Reset
Note
A tone/vibration alert is performed for about 10 seconds when the end of the
x
countdown is reached, and the display returns to the screen that was shown
before the countdown was started.