Operation Guide 3237
E-26
Dual Time:
Hour, minutes, seconds, p.m. (P)
Other:
Backlight (light-emitting diode)
Battery:
One lithium battery (Type: CR2025)
Approximately 10 years on type CR2025 (assuming alarm operation 10 sec./day,
and one backlight operation 1.5 sec./day)
E-25
Specifications
Accuracy at normal temperature:
±
30 seconds a month
Timekeeping:
Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time system: Switchable between 12-hour and 24-hour formats
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Alarms:
5 Multi-function
alarms (Four one-time alarms; one snooze/one-time alarm);
Hourly Time Signal
Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Other: Auto-repeat function
Stopwatch
Measuring unit: 1/100 of a second
Measuring capacity: 23:59' 59.99''
Measuring modes: Elapsed time, split time, two finishes
E-24
Backlight Precautions
•
The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
•
The backlight automatically stops illuminating whenever an alarm sounds.
•
Frequent use of the backlight shortens the battery life.
E-23
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto return features
If you leave a screen with flashing digits for two or three minutes without performing
any operation, the watch automatically saves any settings you have made up to that
point and exits the setting screen.
Data and Setting Scrolling
The
D
button is used to scroll through setting screen data on the display. Holding
down this button during a scroll operation scrolls through the data at high speed.
E-22
Backlight
The backlight uses an LED (light-emitting diode) and a
light guide panel that cause the entire display to glow for
easy reading in the dark.
•
See “Backlight Precautions” on page E-24 for other
important information about using the backlight.
To turn on the backlight
In any mode, press
B
to illuminate the display for about
one second.
E-21
Dual Time
The Dual Time Mode lets you keep track of time in a different time zone.
•
In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the Timekeeping Mode.
To set the Dual Time
1. Press
C
to enter the Dual Time Mode (page E-5).
2. In the Dual Time Mode, hold down
A
until the hour
setting starts to flash, which indicates the setting
screen.
3. Press
C
to change the selection in the following
sequence.
Hour
Minutes
4. Press
D
to increase the setting.
5. Press
A
to exit the setting screen.
Seconds
Hour : Minutes
E-20
To measure times with the stopwatch
Elapsed time
Start
Stop
Re-start
Stop
Clear
Start
Split
(
SPL
displayed)
Split release
Stop
Clear
Start
Split
Stop
Split release
Clear
Split time
Two Finishes
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
