CashTester CT 333
- 6 -
CashTester CT 333
2.2 Report
The CT 333 stores, as long as the machine is ON, the number and the value (incl. the grand total of
all) of the genuine notes (of both currencies) which are checked.
Press once the REP-ADD/DEN button to enter the report mode. To go through the overview of
counted notes and the value(s), press the REP-ADD/DEN button multiple times until you see the
grand total of the currency/currencies installed.
To exit the report function without deleting the stored data, insert a note or press shortly the DIR-
CLEAR button. If you want to clear the memory, hold the DIR-CLEAR button for 2 seconds or turn off
the CT 333.
2.3 Battery
When the CT 333 is charging the optional rechargeable battery, the display will show "–Ch" at an
interval to indicate the charging status. We advise to charge the battery for at least 15 hours before
initial use. If the voltage of the rechargeable battery is low and the CT 333 is not connected with the
power adapter, the display shows "-Lo" at an interval to remind the user that the battery needs to be
charged.
2.4 Update function
The CT 333 can be updated with new software. Follow strictly the
instructions below to update your machine in the correct way:
1.
First turn off the CT 333 and disconnect the power adapter;
2.
Connect the optional update cable to the USB port on your
PC and to the mini-USB port on the CT 333;
3.
Connect the power adapter again;
4.
Press and hold both the ADD/DEN - REP button and the DIR -
CLEAR button and turn on the CT 333;
5.
Now both displays should show ‘-‘ (7 in total). Please repeat
the previous steps if they don’t show up, otherwise continue
to step 6;
6.
Run the optional update software (delivered with the optional
update cable);
7.
Click the ‘LoadFile’ button and select the provided xxxx.UPL
file;
8.
Click the ‘Update Soft’ button to upload the new software to
the CT 333;
9.
When the programming is done (last picture) restart the CT
333.
Maintenance and troubleshooting
3.1 Maintenance instructions
This unit is a precise currency detector that needs periodic maintenance.
1.
Operate this unit in the designated ambient environment only;
2.
Store this unit in a ventilated place and keep away from any strong magnetic field or light;
3.
Use a special cleaning kit to regularly (at least once a month) clean sensors and rubber belts;
4.
Protect the sensor surface from damage, do not touch the surface with sharp or hard objects;
5.
Do not attempt to disassemble the detector.
