Page 12
9. Switching Auto Add on/off
If
Auto Add is on
, the value displayed is automatically added to the totals whenever
the counted cash is removed from the tray.
If
Auto Add is off
, you must press
<+>
, while the value is being displayed and the
cash still on the tray, to add the value to the totals.
To switch Auto Add on (please note that if it is already on, the following action will
switch it off again):
Press and hold down the
<F>
key and, at the same time press the
<+>
key.
0.00
SCOOP
Auto 1c
Auto add on
To switch Auto Add off again and allow manual add:
Press the same two keys again (
<F>
and
<+>
).
0.00
SCOOP
1c
Auto add off.
User must press
<+>
to add.
Page 13
10. Counting loose coin
Ensure that the display indicates loose coin mode (scoop). If it doesn’t, press coin
<
Ð
>
to select loose coin mode.
- 100.00
SCOOP
Auto 1c
Auto add on
Bank mode on
Denomination
Loose coin mode
If the denomination is not the one you want, press coin
<
Ï
>
or
<
Ð
>
until you reach
the correct one.
Place the cup of the selected coins on the cash tray; the Omega “C” will beep and the
display will show the value of the coin in the cup:
- 99.81
$0.19
Auto 1c
Value
(19)
No. of coins
If
Auto Add is off
, leave cup on the tray and press <+> to add to the total,; remove the
cup from the tray then press coin
<
Ï
>
to move to the next denomination.
If
Auto Add is on
, remove the cup from the tray. The Omega “C” will update the
totals, beep to confirm the add, advance to the next denomination in the sequence.
Repeat above steps for each denomination of coin. To skip a denomination, press
coin
<
Ï
>
or
<
Ð
>
.
N.B. If starting bank mode is on, you will see that the display shows a negative
amount until the starting bank is reached; thereafter the display shows
the total for banking; the starting bank has already been taken into
account.
