CSN-A1 user manual
68
If start area is set to upper left or lower right,then this command sets
absolute area in vertical direction
If start area is set to upper right or lower left,then this command sets
absolute area in horizontal direction
Example
None
Vertical relative position setting in page print mode
Name
Vertical relative position setting in page print mode
Code
ASCII
：
GS \ nL nH
Decimal
：
29 92 nL nH
Hex
：
1D 5C nL nH
Function
Page mode setting starts at the current position and prints the start
position relatively vertically
This command sets the distance from the current position to
[(nl+nh*256) *0.125mm]
Range
0 ≤ nL≤255, 0 ≤ nH≤255
Default value None
Notes
When the specified n is a downward motion
：
nL+nH*256=N
When you specify N as the upward motion (negative direction), use the
65536 complement
When the specified n is up motion
：
nL+nH*256=65536-N
Any settings that exceed the specified print area are ignored
Use vertical motion units(y) when you set the start position to the
upper-left or lower-right of the print area
Use horizontal Motion unit (x) when you set the start position to the
upper right or lower left of the print area
Example
None
⑨
Other commands
Printer reset
Name
Printer reset
Code
ASCII
：
ESC @
Decimal
：
27 64
Hex
：
1B 40
Function
The ESC @ command initializes the printer as following
：
This command prints the data contained in the print buffer, and
initializes various setup items.
Restore default values for each parameter
