CashConcepts Europe GmbH
Kemptener Straße 99 – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.tm
Commissioning and Quick Start
Please observe the following instructions when installing and operating the machine in order to obtain optimum test results.
Insert the banknotes guide rail on the reverse side of the device in the provided holder.
Connect the USB cable with the power supply and the power supply with the wall outlet.
Connect the adapter to the CCE 110 NEO, if the device should not automatically turn on, press the ON / OFF button for 2
seconds.
The unit performs a self-test after switching on and the display shows the current software version (Cxxx).
Insert the banknotes one by one into the device.
The notes were checked, ejected backwards and the LED bar lights up green.
At counterfeit suspect notes you will be alerted via a warning tone that this note was not accepted and the LED bar flashes
red, the display will also show an error message.
Display of accepted banknotes
Display of suspicious banknotes
Setting the functions
You can adjust the CCE 110 NEO to your business needs as follows:
Single and total value
Press the “Mode” button shortly to switch between the ADD
function (adding up all accepted notes) and DEN function (display the
denomination of the last accepted bill).
The display will show ADD on the right side of the display and the
total sum will be displayed, if the total value function is activated.
When selected single denomination, you get the message DEN and
the display shows the value of the banknote.
ADD
Total value
DEN
Single value
UK
