CCE – Cash Concepts Europe GmbH
von-Behring-Straße 6a – D-88131 Lindau / Germany
Tel.: +49 (0)8382 – 943 15 – 0 / Fax: +49 (0)8382 – 943 15 – 20
Email: [email protected] / Web: www.cce.gmbh
EN
Setting and function
•
PSVC – Pre-Selected-Value-Counting
The CCE 2040 NG offers you the possibility to display the total value of the sorted banknotes in addition to the quantity. Press
the VALUE button and the selected value of the banknotes to be counted will be shown in the lower left corner of the display.
You can change this value with the buttons "+ / 5" and "- / Batch". The following values are possible for this counting: 5 / 10 /
20 / 50 / 100 / 200 / 500. Press the "CUR" button to switch off the PSVC counting.
Note:
The PSVC count cannot be used simultaneously with the batch count.
•
Addition
The counting machine has an addition function with which several stacks of banknotes can be counted one after the other and
the results are then added up. By pressing the "ADD/7" key, you switch this function on or off. In the display the activated
function is indicated by ADD.
•
Batch
With the counting machine you have the option of entering an individual counting stop or selecting a pre-programmed value.
When the set batch value is reached, the machine stops the counting process. If the counted notes are removed from the
stacker, the machine will continue to count the remaining notes until they have completely run through or the batch value is
reached again.
Press the "-/BATCH" key to recall the preset counting stops (100-50-20-10-off).
By pressing the "-/BATCH" key followed by "SET/6" you activate the numeric key function and can enter the desired batch
value. Press the "-/BATCH" key again to deactivate the counting stop.
•
Automatic / manual start
With the banknote counter, you can choose between an automatic and a manual start of the counting process. By pressing
the "MANUAL / 8" key, you can switch back and forth between the variants. The display shows the selected option (MANUAL
or AUTO).
•
Setting the counterfeit detection
UV testing:
Press the "UV / 1" key to switch counterfeit detection based on UV features on and off. The active status is indicated by UV in
the display.
MG/MT check:
By pressing the key "MG / 2" the counterfeit detection based on MG/MT features can be switched on and off. Pressing once
activates both the MG and the MT check. Pressing it again first switches MT and then MG off. The active status is indicated by
the message on the display.
IR check:
Pressing the key "IR / 3" the counterfeit detection based on UV features can be switched on and off. The active status is
indicated by UV in the display.
DD check:
With the DD check it is possible to look for a smaller banknote in a sorted stack (e.g. if there is a 5 Euro bill in a stack of 20
Euro bills). The difference in size between the two banknotes must be at least 5 mm in order to detect the different note.
