CASELLA CEL CEL-62 Series, Operator'S Manual

Page: 14 / 37

Casella CEL 14
F. SET RUN DURATION (Refer to Figure 8)
RUN DURATION
The Duration timer allows measurements runs to be performed over a specified time. At
the end of this time the measurement will automatically be stopped. From the Menu
screen use the Cursor Keys (C) to navigate to the Settings icon (1). Use the Cursor
Keys (C) to navigate to the Run Duration icon (2). Press
Select (B).
DURATION TIMER
The screen will be displayed with the Duration timer field highlighted. Press Edit (B) to
set the Duration timer. Use the Left/Right Cursors (C) to toggle between either On or
Off. Press Save (B) to continue.
Figure 8 Run Duration (Sheet 1)
DURATION
Press the Up/Down Cursor Keys (C) to highlight the Duration field. To set the Duration
press Edit (B). The hours will be highlighted, use the Up/Down Cursor Keys (C) to
adjust the settings and the Left/Right Cursor Keys (C) to move between the hours,
minutes and seconds. Range of duration/integration time is 00:00:01 to 24:00:00 in 1
second steps. When the Duration has been set, press
Save (B).
Press Exit (A) to go back to the Settings screen.
Figure 8 Run Duration (Sheet 2)